“NEEDLE” Premium Ink Refill- Refill ink is perfect for hassle-free refilling & offers sharp, clear, smudge free & long lasting prints. It has been specially formulated with high quality chemicals to offer excellent colours and vivid printing performance. It is perfect for color and monochrome prints. The ink refill by “NEEDLE” can be Easily Refilled. Refilling instructions are provided with the pack
Outstanding Ink Stability- The Demineralized water based ink produces bright and vivid color, which is in high saturation, good permeability, excellent water-fastness and light-fastness, fast drying, Water resistance and no fading.
,
Specification: Needle CMY Refill Kit with Suction Tool Combo Pack of High Yield Inkjet Cartridge Ink Refill Compatible for HP and Canon Cartridge Printers – 100ml…
Brand
needle, Pin point precision
Manufacturer
Needle Inkjet Technologies
Model
NIT-CARTRIDGE_INK-HP&CANON
Model Name
NIT-CARTRIDGE_INK-HP&CANON
Product Dimensions
7.62 x 5.08 x 12.7 cm, 470 Grams
Item model number
NIT-CARTRIDGE_INK-HP&CANON
Ink Colour
Multicoloured
Printing Media Type
Paper (plain)
Printer Output Type
Color
Resolution
HD
Compatible Devices
Printer
Special Features
Refill Kit
Batteries Required
No
material
Liquid Ink
Country of Origin
India
Item Weight
470 g
8 reviews for Needle CMY Refill Kit with Suction Tool Combo Pack of High Yield Inkjet Cartridge Ink Refill Compatible for HP and Canon Cartridge Printers – 100ml…
4.0out of 5
★★★★★
★★★★★
4
★★★★★
2
★★★★★
1
★★★★★
0
★★★★★
1
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Sarabjit –
WORKING FLAWLESSLY
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Devanshi –
Used Black ink to refill HP 680 cartridge, The result is awesome, but the suction tool was not upto the mark, as unable to fit cartridge in this toolkit for suction purpose, so after refilling, I again opened the coverslip of upper side of cartridge and reversely take out air bubbles and extra ink from the cartridge , and got good print out
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Tarun –
Hassle free experience. Print quality is good too.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
amit –
The ink quality is ok, not great, not bad. Print comes out as little wet so as that you need dry it under fan for two minutes. The problem is with printer and cartridges. If you using HP printer, it’ll automatically stops printing after certain amount of prints as it calculates, even though cartridge has enough ink, it won’t print, gives you blank pages. If you are using HP printers that uses cartridges, then this ink won’t be useful. Don’t believe in YouTube videos, nothing will workout. You may get ten prints extra after refilling, later only blank pages comes out.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
AKA –
I have buy this product for my HP printer. It’s black colour quality is awesome just like original ink. It’s awesome and I’m giving 5 star rating for this product. Thanks!
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Devanshi –
I just have used the product and i must the its working really nice in my HP inkjet printer. In my old color cartridge, blue color was completely used but rest two were there. This you can check by pressing cartridge color dispensing end on a white paper. Mostly just one color gets finished which may have been used more in the color combinations of the print. Ao i only filled around 3 ml of the blue color only in the cartridge. In a few mins i could see that blue color has reached the dispensing edge of the cartridge. After that i just placed the cartridge in the printer and took a few color prints which can out to be really good and almost like the real hp ink prints. Only a small issue was that the printer was not displaying the ink level. So remember: only make a small hole in the ink bottle seal so you can just insert the injection needle in it. Tilt ka bottle if required to make ink reach the needle. This will give you a mess free refilling . I am happy with the purchase so thought of writing a genuine review.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
amit –
My cartridges were dried up so took a while for the ink to reach the bottom and actually print but ya after i let it sit for a day the prints came out fine, really satisfied with the product and the print quality, will definitely buy again as soon as I run out.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Hadi –
Suction tool is smaller than 803 cartridge. Required to change by your company
Sarabjit –
WORKING FLAWLESSLY
Devanshi –
Used Black ink to refill HP 680 cartridge, The result is awesome, but the suction tool was not upto the mark, as unable to fit cartridge in this toolkit for suction purpose, so after refilling, I again opened the coverslip of upper side of cartridge and reversely take out air bubbles and extra ink from the cartridge , and got good print out
Tarun –
Hassle free experience. Print quality is good too.
amit –
The ink quality is ok, not great, not bad. Print comes out as little wet so as that you need dry it under fan for two minutes. The problem is with printer and cartridges. If you using HP printer, it’ll automatically stops printing after certain amount of prints as it calculates, even though cartridge has enough ink, it won’t print, gives you blank pages. If you are using HP printers that uses cartridges, then this ink won’t be useful. Don’t believe in YouTube videos, nothing will workout. You may get ten prints extra after refilling, later only blank pages comes out.
AKA –
I have buy this product for my HP printer. It’s black colour quality is awesome just like original ink. It’s awesome and I’m giving 5 star rating for this product. Thanks!
Devanshi –
I just have used the product and i must the its working really nice in my HP inkjet printer. In my old color cartridge, blue color was completely used but rest two were there. This you can check by pressing cartridge color dispensing end on a white paper. Mostly just one color gets finished which may have been used more in the color combinations of the print. Ao i only filled around 3 ml of the blue color only in the cartridge. In a few mins i could see that blue color has reached the dispensing edge of the cartridge. After that i just placed the cartridge in the printer and took a few color prints which can out to be really good and almost like the real hp ink prints. Only a small issue was that the printer was not displaying the ink level. So remember: only make a small hole in the ink bottle seal so you can just insert the injection needle in it. Tilt ka bottle if required to make ink reach the needle. This will give you a mess free refilling . I am happy with the purchase so thought of writing a genuine review.
amit –
My cartridges were dried up so took a while for the ink to reach the bottom and actually print but ya after i let it sit for a day the prints came out fine, really satisfied with the product and the print quality, will definitely buy again as soon as I run out.
Hadi –
Suction tool is smaller than 803 cartridge. Required to change by your company