Passive PoE- means that input and output voltage are equal
The product are widely used for WLAN, routers, switches, internet telephony, security monitoring etc.
Can work up to30-40 metres/100-130ft (depending on the quality of the cable and the power draw of the device)
Only support 10@Mbps network.
,
Specification: amiciVision Passive PoE Injector and Splitter Kit (2-Pair)
Brand
‎amiciVision
Manufacturer
‎Generic
Package Dimensions
‎17.6 x 11.2 x 3.4 cm, 110 Grams
Item part number
‎POE
Hardware Interface
‎Ethernet
Compatible Devices
‎Desktop
Batteries Included
‎No
Batteries Required
‎No
Type of cable or wire
‎ethernet
Data Link Protocol
‎Ethernet
Has Auto Focus
‎No
Programmable Buttons
‎No
Country of Origin
‎China
Item Weight
‎110 g
8 reviews for amiciVision Passive PoE Injector and Splitter Kit (2-Pair)
4.3out of 5
★★★★★
★★★★★
5
★★★★★
2
★★★★★
0
★★★★★
0
★★★★★
1
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Ehsan Danish Faiz –
I am very happy to buy this product. Working just fine and perfect as desired. I am using it with a distance of almost 50 meters and I don’t have any problem. Also the built is very strong and the quality of the product is very good. Fully satisfied from day one.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
AR –
Excellent work around for power over Ethernet. Very well packaged by seller
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Leo –
Very bad products
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
MOHIT –
The Context: I didn’t have a UPS powered point near the wifi router. So I would be cut off from the internetanytime the power went off.
The Review: Does it’s job. However, I’m not too sure about the power delivery efficiency since I had to try different adapters before I could get it right. This could be a problem with the quality of cable I used hence can’t complain. Anyways, long story short, I could get mw linksys e5600 router up and running with the adapter supplied with the router and everything seems to be fine. Might be too early to comment about durability but typically, these things should last a while if we do not disturb the setup often.
Con: Yes, it throttles the speed. I could get around 195 mbps speed on my 5ghz network before adding the PoE. Now the speed is 97~98 mbps. So I guess this limits the speed to 100 mbps (hence one star less). Anyways, I chose reliability over hyper-speed so am happy.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Leo –
The product fits TP Link router without any issues. We don’t need to have power extension
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Prax –
Converted non POE camera to POE with a single cable. Very helpful product. Never knew this type of injector exists. Solved many problem of wiring.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
pradeep –
I bought it to use with poe switch but later found that these are designed for seperated injected adoptors only, it worked fine with supporting gigabit speeds
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Norek Test –
I wanted to wall mount my router in the center of my house, which did not have a power point. Used this to bundle power with the WAN cable from my fiber ONT modem.
You get the two pairs in a plastic box, safe from transit damages and good for storage.
I have a 60Mbps plan, so did not get to see if it really throttles speed at 100Mbps as some have claimed.
I’d rate the built quality at 4/5 *s. Not that you’ll keep plugging and unplugging this thing frequently. Overall, seems a good buy.
Ehsan Danish Faiz –
I am very happy to buy this product. Working just fine and perfect as desired.
I am using it with a distance of almost 50 meters and I don’t have any problem. Also the built is very strong and the quality of the product is very good. Fully satisfied from day one.
AR –
Excellent work around for power over Ethernet. Very well packaged by seller
Leo –
Very bad products
MOHIT –
The Context: I didn’t have a UPS powered point near the wifi router. So I would be cut off from the internetanytime the power went off.
The Review: Does it’s job. However, I’m not too sure about the power delivery efficiency since I had to try different adapters before I could get it right. This could be a problem with the quality of cable I used hence can’t complain. Anyways, long story short, I could get mw linksys e5600 router up and running with the adapter supplied with the router and everything seems to be fine. Might be too early to comment about durability but typically, these things should last a while if we do not disturb the setup often.
Con: Yes, it throttles the speed. I could get around 195 mbps speed on my 5ghz network before adding the PoE. Now the speed is 97~98 mbps. So I guess this limits the speed to 100 mbps (hence one star less). Anyways, I chose reliability over hyper-speed so am happy.
Leo –
The product fits TP Link router without any issues. We don’t need to have power extension
Prax –
Converted non POE camera to POE with a single cable. Very helpful product. Never knew this type of injector exists. Solved many problem of wiring.
pradeep –
I bought it to use with poe switch but later found that these are designed for seperated injected adoptors only, it worked fine with supporting gigabit speeds
Norek Test –
I wanted to wall mount my router in the center of my house, which did not have a power point. Used this to bundle power with the WAN cable from my fiber ONT modem.
You get the two pairs in a plastic box, safe from transit damages and good for storage.
I have a 60Mbps plan, so did not get to see if it really throttles speed at 100Mbps as some have claimed.
I’d rate the built quality at 4/5 *s. Not that you’ll keep plugging and unplugging this thing frequently. Overall, seems a good buy.