The Nano board is manufactured using a PCB material.
The Nano board is a small, complete, and breadboard-friendly board based on the ATmega328or ATmega168
Kit Contains: Soldered Nano compatible, Nano Cable Mini USB to USB ( cable colour might change from the one shown in picture)
Microcontroller Atmel ATmega328 Operating Voltage (logic level): 5V Input Voltage (recommended): 7V ~ 12V Input Voltage (limits): 6V ~ 20 V
Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current per I/O Pin: 40mA
,
Specification: RoboThings Nano V3
Brand
‎RoboThings
Manufacturer
‎HWAYEH
Product Dimensions
‎3.5 x 1.8 x 1.2 cm, 20 Grams
Item part number
‎RoboThings0008
Operating System
‎Linux
Processor Brand
‎Atmel
Hardware Interface
‎USB
Number of items
‎2
Connector Type
‎USB
material
‎PCb
Country of Origin
‎China
Item Weight
‎20 g
8 reviews for RoboThings Nano V3
4.1out of 5
★★★★★
★★★★★
5
★★★★★
1
★★★★★
1
★★★★★
0
★★★★★
1
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Aaryadev Sharma –
The board is of good build quality which I bought from Robothings. The only point to be kept in mind is that it works with option of old boot-loader in Arduino IDE while uploading sketches. It works a bit slower when compared to new boot loader option while uploading sketches however old boot loader also saves 1.5 kb of flash memory and it is worth sticking to old boot-loader. There is a process published on multiple Arduino forums to upgrade to new boot loader. The new boot loader fixes one or 2 bugs but those may not be a mandatory fixex applicable for majority of the projects. One may continue to use the product as supplied with precious savings in RAM.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Anand pal Singh tomar –
Wate of money don’t buy i have buyed and when i started to do and i started coding after i completed and press upload after few minutes is coming that processr is not working and nothing working waste of money which i saved very hard very very badddd
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Devi P –
I used my arduino uno to program it because the cables are not working ie. they are defective
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Ayush Kumar –
Its an old version (before 2018). If you are purchasing it make sure you select processor: atmega328P(old bootloader) in arduino ide tools section. Also the pins don’t go all the way into the breadboard so mechanically isn’t very secure. Rest all seems fine.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Dr. A K Tyagi –
It is very good product the packing it is very good the USB cable is too nice arduino nano works good thanks for amazon to delivered thank you
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Rohan Rayakar –
Products as described and packed well. The usb cable provided is good too. Flashed the basic led blinking codes and some project codes as well. Works well.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Anand pal Singh tomar –
It’s really a worthy product. It’s working perfectly. No errors and no Bootloader required. Just select the old Atmega Bootloader as shown in third image. Please buy it because it’s An INDIAN brand. Don’t buy cheap Chinese Clones.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Devi P –
All pins already soldered to board it comes along with cable and anti-static cover very well packed.
Aaryadev Sharma –
The board is of good build quality which I bought from Robothings. The only point to be kept in mind is that it works with option of old boot-loader in Arduino IDE while uploading sketches. It works a bit slower when compared to new boot loader option while uploading sketches however old boot loader also saves 1.5 kb of flash memory and it is worth sticking to old boot-loader. There is a process published on multiple Arduino forums to upgrade to new boot loader. The new boot loader fixes one or 2 bugs but those may not be a mandatory fixex applicable for majority of the projects. One may continue to use the product as supplied with precious savings in RAM.
Anand pal Singh tomar –
Wate of money don’t buy i have buyed and when i started to do and i started coding after i completed and press upload after few minutes is coming that processr is not working and nothing working waste of money which i saved very hard very very badddd
Devi P –
I used my arduino uno to program it because the cables are not working ie. they are defective
Ayush Kumar –
Its an old version (before 2018). If you are purchasing it make sure you select processor: atmega328P(old bootloader) in arduino ide tools section. Also the pins don’t go all the way into the breadboard so mechanically isn’t very secure. Rest all seems fine.
Dr. A K Tyagi –
It is very good product the packing it is very good the USB cable is too nice arduino nano works good thanks for amazon to delivered thank you
Rohan Rayakar –
Products as described and packed well. The usb cable provided is good too. Flashed the basic led blinking codes and some project codes as well. Works well.
Anand pal Singh tomar –
It’s really a worthy product. It’s working perfectly. No errors and no Bootloader required. Just select the old Atmega Bootloader as shown in third image.
Please buy it because it’s An INDIAN brand. Don’t buy cheap Chinese Clones.
Devi P –
All pins already soldered to board it comes along with cable and anti-static cover very well packed.