Thermal Conductivity: 6.5W/m-k ( Better than most of the compounds available )
Suitable for: CPU Heatsink, Chip, High Temperature resistance
Low Thermal Resistance and High Conductivity for Heat Transfer – Apply to CPU, VGA, Chipset and other PC components
High Stability and Reliability. Helps disperse the heat from CPU to heatsink effectively
,
Specification: Scout 6.5W/m-k Thermal Paste Compound with Applicator for CPU/Graphic Cards/Heat Sink (Thermal Conductivity: >6.5W/m-k)
Model Number
‎ST-01
Batteries Required
‎No
Batteries Included
‎No
Material Type(s)
‎ceramic
Package Dimensions
‎17 x 10.4 x 2 cm, 100 Grams
Item model number
‎ST-01
Manufacturer recommended age
‎0 months and up
Manufacturer
‎Scout
Item Weight
‎100 g
8 reviews for Scout 6.5W/m-k Thermal Paste Compound with Applicator for CPU/Graphic Cards/Heat Sink (Thermal Conductivity: >6.5W/m-k)
3.9out of 5
★★★★★
★★★★★
3
★★★★★
3
★★★★★
1
★★★★★
0
★★★★★
1
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
imran tarafder –
Over All Good Product Liked it 🙂
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Sabyasachi Chakraborty –
Honestly speaking I didn’t notice any major difference in temp. between my earlier cheap thermal paste(50rs Chinese paste 1.2w/mk) and this one. Only 2-3 degree reduced earlier it was 74-76 nd after applying 70-72 in load condition.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
TANAY –
After application the cpu temps droped by 8-10 degrees and gpu temps 85 to 76 under load for my GTX 970 zotac . Overall much better than cheap 50-100 rs paste as per performance is concerned. If ur cpu/GPUs paste is dried up you may use this as an alternative can’t say now regarding the life hoping alteast a year without reapplication if any proplem arises in future I may update it here 😊
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
NawaZ –
Budget friendly
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
apurva –
Easy to use. After applying thermal pest cpu temperature maintain very well. I am fully satisfied. I am writing review after 2 month.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Irfan Ali –
This paste is what I needed. Optimal heat dissipation for my Acer Aspire 7 ryzen 5 5500u. Initially on my factory applied thermal paste it reached 95 degrees while playing valorant and recently it was reaching 100 and thermal throttling in 5 minutes. After applying this my CPU temp never goes above 80 degrees and mostly stays at 75. I am quite satisfied.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Harshwardhan –
Received a Used Product with the Applicator Spatula missing, the main reason I ordered it was for the applicator. But the seller sent an opened packet without it.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
TANAY –
UPDATE: The temperatures have even gone down further after hearing a suggestion! Previously I had applied the Scout paste through spread method with the applicator provided in the pack. Then my friend suggested to go with simply the line method. As soon as I did it, and ran the aida64 stress test, the temps have further decreased to 66C instead of previous 80C. This is a real 32C drop of temperature from 98C! Just amazing…. And the GPU temperature didn’t exceed 62C while prolonged period of gaming. So now I suggest everyone not to use spread method on laptop CPUs. Go with line method and see the magic! ********************************************************* Previous Review with Spread Method: Maintains the temperature at 79.5C under prime 95 full CPU stress.. previously it was going even to 98C while Tj max is 105 for my R5 3550H cpu. A nice drop of 20C under load straightway…… will update after one month. So far so good..
imran tarafder –
Over All Good Product Liked it 🙂
Sabyasachi Chakraborty –
Honestly speaking I didn’t notice any major difference in temp. between my earlier cheap thermal paste(50rs Chinese paste 1.2w/mk) and this one. Only 2-3 degree reduced earlier it was 74-76 nd after applying 70-72 in load condition.
TANAY –
After application the cpu temps droped by 8-10 degrees and gpu temps 85 to 76 under load for my GTX 970 zotac . Overall much better than cheap 50-100 rs paste as per performance is concerned. If ur cpu/GPUs paste is dried up you may use this as an alternative can’t say now regarding the life hoping alteast a year without reapplication if any proplem arises in future I may update it here 😊
NawaZ –
Budget friendly
apurva –
Easy to use. After applying thermal pest cpu temperature maintain very well.
I am fully satisfied.
I am writing review after 2 month.
Irfan Ali –
This paste is what I needed. Optimal heat dissipation for my Acer Aspire 7 ryzen 5 5500u. Initially on my factory applied thermal paste it reached 95 degrees while playing valorant and recently it was reaching 100 and thermal throttling in 5 minutes. After applying this my CPU temp never goes above 80 degrees and mostly stays at 75. I am quite satisfied.
Harshwardhan –
Received a Used Product with the Applicator Spatula missing, the main reason I ordered it was for the applicator. But the seller sent an opened packet without it.
TANAY –
UPDATE:
The temperatures have even gone down further after hearing a suggestion! Previously I had applied the Scout paste through spread method with the applicator provided in the pack. Then my friend suggested to go with simply the line method. As soon as I did it, and ran the aida64 stress test, the temps have further decreased to 66C instead of previous 80C. This is a real 32C drop of temperature from 98C! Just amazing…. And the GPU temperature didn’t exceed 62C while prolonged period of gaming.
So now I suggest everyone not to use spread method on laptop CPUs. Go with line method and see the magic!
*********************************************************
Previous Review with Spread Method:
Maintains the temperature at 79.5C under prime 95 full CPU stress.. previously it was going even to 98C while Tj max is 105 for my R5 3550H cpu. A nice drop of 20C under load straightway…… will update after one month. So far so good..