Cooler Master Cryofuze 5 Thermal Paste – for Processor, GPU, Console, Laptop | 12.6 W/m-K Thermal Conductivity | Excellent Performance | Easy to…

I have used some local thermal paste all my life which are decent in the first few months but after a certain time they aren’t effective.

I found out that this particular thermal paste is quite effective and even after 4 months still is working very well.

Its a little thicker than normal paste so you might have to apply more and spread evenly, but it sure is worth the money.

Easy to install and the provided spreader does the job good and effectively without making a mess.

My temps (on a gaming laptop from MSI in hottest environment of Gujarat) currently are 85°C CPU under 100% load and 69°C GPU under 99% load.

[Don’t apply the way I have shown in picture. Use drop method instead.]
I brought this because I was noticing my laptop was heating during normal usage.
It’s been a long time (9 years approx.) since I changed the thermal paste. So I brought this because of its high thermal conductivity.
At first I applied it making a thin even layer around cpu and gpu but that doesn’t worked for me, the temperatures rise above of what was before.

Then I reopened and re-applied but this time I just dropped a small drop of thermal paste above cpu and gpu. This method worked and I noticed better heat conduction.
My laptop seems to be heating less now.
So, i will suggest you to use a drop method instead of making a thin layer of paste as the drop will spread evenly by itself when pressed by the heat sink plate.
But if you will make a thin layer by yourself the paste will leave it’s place and move to sides when pressed by heat sink (I saw it when I opened it for re-application).

The paste was thick and sticky so you need to be careful while applying as it may stick to everywhere it comes contact to and can make a mess.

I don’t know if the product is bad or what i received is an old expired product , it is not even close to paste that can be easily applied . Its so hard that cannot be spreader over the cpu

Fa il suo lavoro benissimo, dopo più di un mese di utilizzo dico che le temperature sono tra i 55-80°C quanto faccio gaming ma idle sono a volte anche sotto i 55°C. (In estate)

Works perfectly fine. Reduce temperature by 25°C instantly. In my laptop cooling fan was always run faster than cooler at my home. Now it just got silent. As temperature is maintained by thermal paste.

Keep few things in mind :

1. clean old thermal paste from CPU, GPU & IC using IPA (isopropyl alcohol 90%+) with cotton swab or cotton cloth.

2. Let it dry completely.

3. Put a pea size paste on the processor. And put heat sink back on place and tighten the screws.

(Do not spread the paste using anything or the spreader provided in the box.)

Its a freaking good paste!! It even performs better than the factory thermal paste that comes with laptop but its viscosity is very high so its a little difficult to spread it and dries out quickly. But rest it does what it says. Maybe in a different laptop it might last long.