This is not your regular impregnated foam. This stuff is heavy. You can also tell by the temperature in your hand that it’s not your everyday thermal foam substrate. It has the highest thermalIt has the highest thermal transfer of of anything I can find at this writing. I have to admit one side of the peel off came loose when trying to cut the pieces but based on the diamond pattern I suppose this makes sense. It was easy to apply, easy to measure, and stays put even if you have to flip your surface over. Time will tell about heat transfer, and how long it will last. But it definitely does not feel like plastic. Impressive indeed. It took me three failed purchases to get here. I should have learned my lesson before. It’s worth it.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
pranit –
So I own a legion 5 pro, which as I looked up, uses 1mm thermal pads (as per reviews). After installing these thermal pads, my temperature rose up drastically (from 90-102 C max). Knew something wasn’t right. Temperature on idle is fine, but while gaming, would shoot up 101-102 C. Also, the 1mms do not compress easily. Adhesion is fine. Planning to order 0.5mms now. :/
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
pranit –
la version de 1.5mm es la mejor para poner en las 8 memorias Ram y las 6 V-Ram de la GPU en un PS4 PRO, disipan bien el calor y junto con pasta termica de alta calidad son la mejor opcion para solucionar el ruido de turbina de avion de los modelos 7000
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
C. Miller –
Helt klart bland dem bästa thermalpadsen du kan köpa i Sverige. Kolla youtube in du inte tror mig. Rekommenderas starkt!
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Harsh Sharma –
Fantastic performance, previously i used thermal grizzly pads on my zotac 3070ti amp holo. They had little to no effect on the card, as the memory temps consistently touched 104 under heavy gaming. But with GELID it doesnt go past 90 no matter what. Without a doubt the best pads.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Saurabh –
20c degree reduced after changing. Before applying clean heatsink properly and apply
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Meenakshi –
It is great for RTX 30 series memory temp. problem mine just drops from 104C to 84 C. great product in good prices.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Meenakshi –
I purchased these to change the thermal pads on my Zotac 3080 Amp Holo as my memory temps were hitting 104 to 106 degrees Celsius at 70% PL and 100 fans. After using these thermal pads my memory are sitting at 78-82 degrees. These are amazing results. One more thing due to cold weather in north india when these pads were delivered they were little hard but after keeping them near GPU they became soft. In the picture the small pieces on side are the old thermal pads. Kept them in case warranty is needed I will put them back before taking to service center
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Family Bee –
They will start to ooze their magic juices over time if used on hot components like G6X VRAM that’s mining, or mobo power stages that are being worked hard.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Phuman –
I’ve used it on motherboard components attached to heatsink of MSI GV62 8RE. So far so good. Review after one week :
1. Although under full load my laptop still goes over 90° (typical MSI Problem) but it’s atleast a bit better now, it stays at 94-95° but previously it used to reach around 98-99°. So I’m seeing a 4-5° cooler now.
2. At Idle : Previously my laptop used to stay at ~75° at idle but now it stays around 35-40°. So a pretty considerable jump there.
3. At mild Usage : previously ~85°, now ~60-65°
Note : I also used Kyronaut’s Thermal Paste on CPU & GPU along with this pad on components attached to heatsink. So results are accordingly.
Installation : these are quite easy to install, it was my first time using thermal pads and I didn’t had any problem so you won’t have any either.
Size : 1 Pad covered all essential parts needed to be covered, except ssd. So yeah good size for heatsink installation.
Verdict : Go for it, these are better than stock thermal pads company provides you out of the box.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Vishvajeet Singh –
The product is good. Shipment was on time.
Coming to pads – For noobs – These are harder compared to silicon ones. Therefore cut it wisely with a proper blade, or else you can break it.
I Used 3mm for backplate of my gigabyte 3080, Along with 2mm for front. Did wonders. The stock ones melted, and replacement reduced the temps drastically Thermal throttling is no more there.
Neftali B. –
Quando comparado com pastas térmicas, os pads térmicos tem:
Pros: espessura controlada, estado sólido (silicone), estabilidade quÃmica e taxa de transferência térmica constante ao passar do tempo;
Cons: preço.
Amazon Customer –
This is not your regular impregnated foam. This stuff is heavy. You can also tell by the temperature in your hand that it’s not your everyday thermal foam substrate. It has the highest thermalIt has the highest thermal transfer of of anything I can find at this writing. I have to admit one side of the peel off came loose when trying to cut the pieces but based on the diamond pattern I suppose this makes sense. It was easy to apply, easy to measure, and stays put even if you have to flip your surface over. Time will tell about heat transfer, and how long it will last. But it definitely does not feel like plastic. Impressive indeed. It took me three failed purchases to get here. I should have learned my lesson before. It’s worth it.
pranit –
So I own a legion 5 pro, which as I looked up, uses 1mm thermal pads (as per reviews). After installing these thermal pads, my temperature rose up drastically (from 90-102 C max). Knew something wasn’t right. Temperature on idle is fine, but while gaming, would shoot up 101-102 C. Also, the 1mms do not compress easily. Adhesion is fine. Planning to order 0.5mms now. :/
pranit –
la version de 1.5mm es la mejor para poner en las 8 memorias Ram y las 6 V-Ram de la GPU en un PS4 PRO, disipan bien el calor y junto con pasta termica de alta calidad son la mejor opcion para solucionar el ruido de turbina de avion de los modelos 7000
C. Miller –
Helt klart bland dem bästa thermalpadsen du kan köpa i Sverige. Kolla youtube in du inte tror mig. Rekommenderas starkt!
Harsh Sharma –
Fantastic performance, previously i used thermal grizzly pads on my zotac 3070ti amp holo. They had little to no effect on the card, as the memory temps consistently touched 104 under heavy gaming. But with GELID it doesnt go past 90 no matter what. Without a doubt the best pads.
Saurabh –
20c degree reduced after changing.
Before applying clean heatsink properly and apply
Meenakshi –
It is great for RTX 30 series memory temp. problem mine just drops from 104C to 84 C. great product in good prices.
Meenakshi –
I purchased these to change the thermal pads on my Zotac 3080 Amp Holo as my memory temps were hitting 104 to 106 degrees Celsius at 70% PL and 100 fans.
After using these thermal pads my memory are sitting at 78-82 degrees.
These are amazing results.
One more thing due to cold weather in north india when these pads were delivered they were little hard but after keeping them near GPU they became soft.
In the picture the small pieces on side are the old thermal pads. Kept them in case warranty is needed I will put them back before taking to service center
Family Bee –
They will start to ooze their magic juices over time if used on hot components like G6X VRAM that’s mining, or mobo power stages that are being worked hard.
Phuman –
I’ve used it on motherboard components attached to heatsink of MSI GV62 8RE.
So far so good.
Review after one week :
1. Although under full load my laptop still goes over 90° (typical MSI Problem) but it’s atleast a bit better now, it stays at 94-95° but previously it used to reach around 98-99°. So I’m seeing a 4-5° cooler now.
2. At Idle : Previously my laptop used to stay at ~75° at idle but now it stays around 35-40°. So a pretty considerable jump there.
3. At mild Usage : previously ~85°, now ~60-65°
Note : I also used Kyronaut’s Thermal Paste on CPU & GPU along with this pad on components attached to heatsink. So results are accordingly.
Installation : these are quite easy to install, it was my first time using thermal pads and I didn’t had any problem so you won’t have any either.
Size : 1 Pad covered all essential parts needed to be covered, except ssd. So yeah good size for heatsink installation.
Verdict : Go for it, these are better than stock thermal pads company provides you out of the box.
Vishvajeet Singh –
The product is good.
Shipment was on time.
Coming to pads – For noobs – These are harder compared to silicon ones. Therefore cut it wisely with a proper blade, or else you can break it.
I Used 3mm for backplate of my gigabyte 3080,
Along with 2mm for front.
Did wonders.
The stock ones melted, and replacement reduced the temps drastically
Thermal throttling is no more there.
Went from 59-62Mh/s to 102 Mh/s