Excellent thermal conductivity:Made of thermal silica gel with heat conductivity of 6.0W/Mk
Great safety and stability:electrical insulation,in -40℃-200℃ will not melt.Wear Resistant,anti static,fire retardant,buffering,no toxic,odorless,no corrosion,no stimulation,no damage to metal materials
Fits for Control board,motor,electronics,auto mechanics,computer host,laptop,DVD,VCD,LID,Set-top box,LED IC SMD DIP and any cooling modules
Packed with 5 thermal pads,one size,each with 5 pieces:20x67x1.0mm
Easy to install,you can select most suitable thickness and cut the required sizes.Great replacement for traditional heat sink compound grease paste
,
Specification: ADWITS 5 Pack 20x67x1.0mm Thermal Conductive Silicone Pads with 6.0 W/mk Thermal Conductivity, Soft Safe Simple to Apply for SSD CPU GPU LED IC…
Brand
ADWITS
Manufacturer
ADWITS
Package Dimensions
14.7 x 9.8 x 0.7 cm, 20 Grams
Item part number
SILICONE-1mm-5X_EU
Wattage
6 Watts
Batteries Included
No
Batteries Required
No
material
Silicone
Country of Origin
China
Item Weight
20 g
13 reviews for ADWITS 5 Pack 20x67x1.0mm Thermal Conductive Silicone Pads with 6.0 W/mk Thermal Conductivity, Soft Safe Simple to Apply for SSD CPU GPU LED IC…
4.4out of 5
★★★★★
★★★★★
9
★★★★★
2
★★★★★
1
★★★★★
0
★★★★★
1
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Joel A. –
Ottimo prodotto
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Jenil Gala –
I applied on my m.2 nvme SSD in Victus 15. The result is quite good.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Romit sengupta –
it works !!! I have 2 NVME drives installed in the system and KC3000 1tb (OS drive) & WD SN735 1tb. The WD runs really hot and surprisingly the KC3000 stays much cooler. On a hot summer day when the ambient temp is around 31’c the KC3000 used to hover at 51-53’c & SN735 used to be around 64-66’c which was concerning for me regarding its longevity. I applied the thermal pads (2mm) on both the drives and removed the existing one and the temp has come down significantly for both the drives. Now the KC3000 hovers around 41-44’c and the SN735 around 52-55’c on a daily moderate workload. If I am in an AC room both the drives get 3-5’c cooler gives me a huge peace of mind.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Sree Krishna –
Price is very high that too no metal heatsink provided with it
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Anonymous –
Perfecto para bajar de temperatura tu PS4 👏👏👏
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Pratik –
Going above 40°c ssd and optane memory and i put thermal pads above and below on my intel ssd both temperatures are below 40°c and same temperatures reporting before that 10°c temperatures difference
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Pratik –
This is the best product. But the price is a bit high. The GPU temperature was 80 to 85.C before this thermal pad was applied. After applied this thermal pad in the GPU I got to see the GPU temperature drop from 20 to 15.C. Right now the high temperature of GPU remains between 65 to 70.C. I am very happy with this product.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Amazon Customer –
The thermal pads are very effective and work well, I have used them in my laptop which has an nvme drive which heated upto 90 degrees, but after I applied 2 layers of thermal pads so that they got in contact with the body, the temperatures dropped to 50, I am very happy and I think you should buy this if your drives or gpus(vram) are overheating.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Amazonero –
Bonne transmission de chaleur et déjà prédécoupé.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
K –
Solucion para la temperatura de algunas RTX3080 a la hora de minar, mucho mejores que las que vienen en Gigabyte de fabrica y ademas podemos colocarlas en la parte del blackplate para bajar las temperaturas de las memorias a 94ºC y minar a 100 MH con una 3080 sin problemas
*VENTAJAS: – Buena calidad del ThermalPad – Se pueden unir varios para hacer mayor grosor sin perder mucha conductividad – Fáciles de trabajar con ellas – No sueltan ese aceitillo que hacen algunos Thermal al coger temperatura y perder conductividad termica
* DESVENTAJAS: – Es un producto caro
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Arka Das –
Primarily purchased this for my (Alienware 17 R4 laptop) NVME M.2 Toshiba SSD (:E/) which was running very hot (> 60 deg C) during idle and during gaming and testing the temps would get crazy (> 75 deg C) which according to me is unacceptable. The temps during idle was baffling as this drive is just storage and not used for the OS. At times the 70 plus Toshiba drive was running even hotter than my GTX 1070M LOLZ!!!! I have been using these for over a month now and I am impressed. I had to stack 3 of the pads together to reach the chassi, but it does the job. As can be seen from the attached pics, there is about a 10 – 15 deg temp drop after application on my Toshiba 512gb NVME SSD I was So impressed that I applied the same to my Samsung 960 Pro 256 gb (:C/ :D/) and got around 10 deg C drop in temps. This much drop in temps is crazy for a thermal pad and I was not expecting such good results. Its safe to say that the pads will surely extend the life of both SSD’s by a fair amount. I would say go for it and beat the heat!!! Note : the thermal exchange is better if the underside of the chassi is metal and would reduces if its plastic. All the best!!!!
Joel A. –
Ottimo prodotto
Jenil Gala –
I applied on my m.2 nvme SSD in Victus 15. The result is quite good.
Romit sengupta –
it works !!!
I have 2 NVME drives installed in the system and KC3000 1tb (OS drive) & WD SN735 1tb. The WD runs really hot and surprisingly the KC3000 stays much cooler.
On a hot summer day when the ambient temp is around 31’c the KC3000 used to hover at 51-53’c & SN735 used to be around 64-66’c which was concerning for me regarding its longevity.
I applied the thermal pads (2mm) on both the drives and removed the existing one and the temp has come down significantly for both the drives.
Now the KC3000 hovers around 41-44’c and the SN735 around 52-55’c on a daily moderate workload.
If I am in an AC room both the drives get 3-5’c cooler gives me a huge peace of mind.
Sree Krishna –
Price is very high that too no metal heatsink provided with it
Anonymous –
Perfecto para bajar de temperatura tu PS4 👏👏👏
Pratik –
Going above 40°c ssd and optane memory and i put thermal pads above and below on my intel ssd both temperatures are below 40°c and same temperatures reporting before that 10°c temperatures difference
Pratik –
This is the best product. But the price is a bit high. The GPU temperature was 80 to 85.C before this thermal pad was applied. After applied this thermal pad in the GPU I got to see the GPU temperature drop from 20 to 15.C. Right now the high temperature of GPU remains between 65 to 70.C. I am very happy with this product.
Amazon Customer –
The thermal pads are very effective and work well, I have used them in my laptop which has an nvme drive which heated upto 90 degrees, but after I applied 2 layers of thermal pads so that they got in contact with the body, the temperatures dropped to 50, I am very happy and I think you should buy this if your drives or gpus(vram) are overheating.
Amazonero –
Bonne transmission de chaleur et déjà prédécoupé.
K –
Solucion para la temperatura de algunas RTX3080 a la hora de minar, mucho mejores que las que vienen en Gigabyte de fabrica y ademas podemos colocarlas en la parte del blackplate para bajar las temperaturas de las memorias a 94ºC y minar a 100 MH con una 3080 sin problemas
*VENTAJAS:
– Buena calidad del ThermalPad
– Se pueden unir varios para hacer mayor grosor sin perder mucha conductividad
– Fáciles de trabajar con ellas
– No sueltan ese aceitillo que hacen algunos Thermal al coger temperatura y perder conductividad termica
* DESVENTAJAS:
– Es un producto caro
Arka Das –
Primarily purchased this for my (Alienware 17 R4 laptop) NVME M.2 Toshiba SSD (:E/) which was running very hot (> 60 deg C) during idle and during gaming and testing the temps would get crazy (> 75 deg C) which according to me is unacceptable. The temps during idle was baffling as this drive is just storage and not used for the OS. At times the 70 plus Toshiba drive was running even hotter than my GTX 1070M LOLZ!!!!
I have been using these for over a month now and I am impressed. I had to stack 3 of the pads together to reach the chassi, but it does the job. As can be seen from the attached pics, there is about a 10 – 15 deg temp drop after application on my Toshiba 512gb NVME SSD I was So impressed that I applied the same to my Samsung 960 Pro 256 gb (:C/ :D/) and got around 10 deg C drop in temps. This much drop in temps is crazy for a thermal pad and I was not expecting such good results. Its safe to say that the pads will surely extend the life of both SSD’s by a fair amount. I would say go for it and beat the heat!!!
Note : the thermal exchange is better if the underside of the chassi is metal and would reduces if its plastic.
All the best!!!!
Aldo –
Works as expected
Joel A. –
What to say? Expensive blue-tek.