Specification: inRobert DIY Two Ball Bearing Video Card Cooling Fan for Zotac GTX 1060 3GB/ 1060 Mini
Brand
‎inRobert
Model number
‎T129215SU
Item Weight
‎9.07 g
Product Dimensions
‎8.5 x 8.5 x 1.5 cm, 9.07 Grams
Item model number
‎T129215SU
Item Height
‎15 Millimeters
Item Width
‎8.5 Centimeters
Auto Focus Included
‎No
Graphics Coprocessor
‎NVIDIA GeForce GTX 1060
Graphics Memory Size
‎3 GB
Type of connector
‎3-Pin
Voltage
‎12 Volts
Wattage
‎3 Watts
Noise Level
‎48 dB
Are batteries included?
‎No
5 reviews for inRobert DIY Two Ball Bearing Video Card Cooling Fan for Zotac GTX 1060 3GB/ 1060 Mini
4.6out of 5
★★★★★
★★★★★
3
★★★★★
2
★★★★★
0
★★★★★
0
★★★★★
0
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Alex Barakaev –
Fits perfectly my single-fan AMD Radeon RX 580 FH.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Benjamin –
Habe mir den Lüfter zwangsläufig bestellen müssen, da der alte bei meiner GTX970 einen Lagerschaden hatte. Die Produktbeschreibung ist mit den dazu geschriebenen Abmessungen sehr gut und genau, nach 5x nachmessen am alten Kühler hab ich dann den hier bestellt. Amazon-Typisch schnell geliefert worden, hab ihn direkt eingebaut und hab seit dem wider eine leise -und kühle Grafikkarte.
Anmerkung: ich hab eine GTX970 mit HP Referenz Design, d.h. Das der Lüfter nicht zwangsläufig auf jede 970er passt, also vorher Lüfter ausbauen und nachmessen!
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
leroy –
Pas de probleme,
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
David Moule –
After searching through many fans these were closest to what I needed to replace my noisy cooling fans on my ASUS GTX580 graphics card. (An old card but still useful performance for a backup gaming PC). These fans are about 5mm smaller diameter but had the correct 3 leg mounting with 40mm diag spacing for screws (NB! need to use the old screws). Also the 4 pin plugs are of the correct gender for this card. NB! Use a well fitting small cross head screwdriver to remove the fan cover screws (3 screws are hidden under orange flashes on the body of the cover) Route the fan cables carefully to prevent fouling with the fans. Reinstalled and tested using 3D Mark software and adjusted cooling curve to maintain good cooling with lowest possible fan speed. Nice and quiet. BTW not too noisy when set at 100% speed. Cant comment on reliability as early days. Very pleased I can still get service from this GFX.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Cliente de Amazon –
Funciono muy bien para mi GPU. Tuve que hacer una pequeña modificación, mÃnima. Para que el cable pasara bien. Pero de lo demás Perfecto. Muy silencioso y no se balancea ni nada
Alex Barakaev –
Fits perfectly my single-fan AMD Radeon RX 580 FH.
Benjamin –
Habe mir den Lüfter zwangsläufig bestellen müssen, da der alte bei meiner GTX970 einen Lagerschaden hatte. Die Produktbeschreibung ist mit den dazu geschriebenen Abmessungen sehr gut und genau, nach 5x nachmessen am alten Kühler hab ich dann den hier bestellt.
Amazon-Typisch schnell geliefert worden, hab ihn direkt eingebaut und hab seit dem wider eine leise -und kühle Grafikkarte.
Anmerkung: ich hab eine GTX970 mit HP Referenz Design, d.h. Das der Lüfter nicht zwangsläufig auf jede 970er passt, also vorher Lüfter ausbauen und nachmessen!
leroy –
Pas de probleme,
David Moule –
After searching through many fans these were closest to what I needed to replace my noisy cooling fans on my ASUS GTX580 graphics card. (An old card but still useful performance for a backup gaming PC).
These fans are about 5mm smaller diameter but had the correct 3 leg mounting with 40mm diag spacing for screws (NB! need to use the old screws). Also the 4 pin plugs are of the correct gender for this card.
NB! Use a well fitting small cross head screwdriver to remove the fan cover screws (3 screws are hidden under orange flashes on the body of the cover) Route the fan cables carefully to prevent fouling with the fans.
Reinstalled and tested using 3D Mark software and adjusted cooling curve to maintain good cooling with lowest possible fan speed. Nice and quiet. BTW not too noisy when set at 100% speed. Cant comment on reliability as early days.
Very pleased I can still get service from this GFX.
Cliente de Amazon –
Funciono muy bien para mi GPU. Tuve que hacer una pequeña modificación, mÃnima. Para que el cable pasara bien. Pero de lo demás Perfecto. Muy silencioso y no se balancea ni nada