inRobert 87mm T129215SU Graphics Card Cooling Fan for ASUS Strix GTX980Ti/R9390/RX480/RX580 Video Card Cooler (Fan-3pcs)
₹4,593.00
Last updated on August 18, 2024 7:18 am
,
Specification: inRobert 87mm T129215SU Graphics Card Cooling Fan for ASUS Strix GTX980Ti/R9390/RX480/RX580 Video Card Cooler (Fan-3pcs)
|
6 reviews for inRobert 87mm T129215SU Graphics Card Cooling Fan for ASUS Strix GTX980Ti/R9390/RX480/RX580 Video Card Cooler (Fan-3pcs)
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
Related Products
inRobert 87mm T129215SU Graphics Card Cooling Fan for ASUS Strix GTX980Ti/R9390/RX480/RX580 Video Card Cooler (Fan-3pcs)
₹4,593.00
Erick P. –
I had issues with my Asus GTX 1080 strix graphics card after around 4 years of use, one fan was completely out of service, another fan was making a terrible squeaking noise, and the last fan was the only fully working one. Ordered these replacement fans and they arrived really quickly, only one day shipping. I ordered all three and replaced all three, the first two fans didn’t have a good track record so I replaced the only working fan as well as a precaution as it was already old. The box that the fans came in also was a pretty handy tool in keeping track of the screws that I was removing. I recommend watching a few Youtube videos on how the process goes, as you will have to separate the heatsink from the rest of the graphics card. The process was fairly simple, just take the necessary precautions. The only issue that I ran into was that the fan cables were a bit longer than necessary, but it was nothing that a bit of bending and tape couldn’t fix. It all fit snugly under the shroud so no major issues there. Another thing that I did while I was doing this was to take the opportunity to replace the thermal paste on my GPU, as it was already old and hardened. I also recommend that you do this if your GPU is older than 3-4 years old, if you’re willing and capable. After installing the new fans and replacing the thermal paste, my idle temperature went from 58C to 44C with the fans always on, and 58C to 53C with 0db fan mode on. My full load temps also went from around 75-80C to 60-63C. Overall I’m happy with the improvements, great product.
C. D’abaco –
Great fans, worked on my Strix 980Ti. No more squealing fans to annoy the family. Works perfectly.
Richa Chavan –
good quality and fit perfectly on asus strix 1080
大屋 清隆 –
グラフィックカードのファンの軸摩耗で異音が酷くなったため購入。グラボ一式交換するより10分の一以下で購入でき満足です。また、注文から1週間程度で到着し非常に助かりました。
Ng Kah Peng –
One of my gpu fan blades got snapped off and replaced it with this. No more ticking noise when my gpu fans spins.
Highly recommended!!!
Gaffer –
Purchased for a 6 year old ASUS ROG-STRIX-GTX1080TI-O11G-GAMING that had a failed C fan at the time of ordering. I ordered the full set mainly for price, but ended up replacing all 3 because in the three days between ordering and arrival the A fan also failed and I felt Murphy staring at that B fan. This brand also has the wire gauge 1 step up from the OEM fans, making them more rigid and a tighter fit to go back in the shroud at the double back by the A connect going back to the PCB connect. With the fans installed the harness was a tad short getting to the PCB, which was due to the heat shrink at the same A split, but warming the shrink to move back a quarter inch was enough to allow a comfortable PCB connection.
Everything spun up as it should. This replacement set is not perceptively different in noise from the OEM fans, though the idle temp is a couple degrees lower than it used to be under full fan speed. Ran it for ~50 hours at 100% for burn-in testing, then another day on auto watching temps through various titles with flying colors as they are all fully responsive to all speed controls and sensors.
One can hope the replacement set is equal or better than the OEM, but only time will tell.