Take your ultimate gaming experience to the next level with the rugged ZEB-Invicta chassis with a heavy-duty structure that is designed exclusively to improve the visual appeal of your gaming setup with its tempered glass on the left-side panel outlook
This chassis has a mid-tower form factor and is designed to support ATX/mATX and mini ATX.
For ample ventilation of the chassis, it is built-in with 4 120mm RGB Halo ring fans with 1 on the rear and 3 fans in the front. 2 fans at the top and 2 more fans at the bottom can be added externally for optimized airflow
Plenty of cooling for the chassis is provided by the AIO coolers of which one cooler up to 360mm can be installed on the front
For audio and other device connectivity, the chassis comes with one USB 3.0 port, 2 USB ports, a mic, and headphone ports. You can now insert add-on cards at the back panel of the chassis in its 7 expansion slots
Fans inside the chassis can be controlled by the LED control switch on the front panel that controls the RGB LED light modes
The chassis can support VGA cards up to 320mm long and accommodate CPU coolers at 160mm in height. The power supply can be installed on the bottom of the chassis
The top and bottom of the chassis are fitted with magnetic dust filters to not allow dust accumulation
Your cluttered cables plugged into the chassis can be organized efficiently with its cable management so, there is room to fit in your heavy-duty components
,
8 reviews for ZEBRONICS Invicta Mid-Tower Premium Gaming Cabinet ATX/MicroATX/Mini ITX, 3X 120mm Front + 1x 120mm Rear Fan, Halo Glow Ring RGB Fans, RGB LED…
4.0out of 5
★★★★★
★★★★★
4
★★★★★
2
★★★★★
1
★★★★★
0
★★★★★
1
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
ashish..manjhi –
The media could not be loaded.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
It is a defective item and when asked to exchange it, they are neither paying nor returning the payment. –
I was looking for an argb white dual chamber case and came across this one and it didn’t disappointed at all . I bought it from a local store for 4500/- which was a great deal while Amazon price was 5299/- .
Coming to the build quality, it’s sturdy for the price paid and loons premium , however I have noticed when I mounted the PSU and tightened the screws , the paint was peeling off around it. Fans are ARGB and addressable via motherboard if you have argb headers ( I’ve used a gigabyte motherboard and the RGB Fusion software didn’t work with this case , but worked well with third party softwares such as openRGB) . Pre-installed fans looks premium but the speeds are fixed and we cannot control it , also all 3 fans are mounted in outtake mode . So there is a concern in airflow . I’ve a Ryzen 5 5600 with the stock cooler and temps are idle on 39-40° and went upto 87 in 100% load for sometime . So better to use a third party cooler and mount 2 intake fans at the top or mount an 240mm AIO on the top side . The packaging said it could mount 2 3.5″ HDD but theres only 1 slot avilable for HDD and 2 for SSD . You can mount 2 HDD if you put some form on the side of the left side chasis cover . Also mount the HDD first before mounting the PSU . Coming to cable management, it’s very difficult on this case as there’s little space to hide all the wires . If you are using a non modular PSU then it would be hard to route and tie up all those wires . Wires would be congested and in future if you want to add up some components then it would be a headache for you . But all the quality of the cables such as USB 3.0 and 2.0 and RGB’s are good quality . Enough cable tag or ties and screws are provided for motherboard and drive mountings . Also keep in mind that this case can accommodate only Micro ATX or ITX form factor motherboards . A mircro ATX board looks fuller in this case . If you have a full ATX board , better to go for Hermes or ANT E-Sports Crystal XL .
Conclusion :- if you are looking for an ARGB Dual chamber case on a budget , then this is definitely worth it .
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Kunal Arora –
It has plenty of room for cable management and a psu shroud all in all a great choice for pc.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Placeholder –
Good product quality thikness is ok ok
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Jagan –
It is a defective item and when asked to exchange it, they are neither paying nor returning the payment.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Jagan –
The media could not be loaded.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Sabari Roy –
Get one new now fully satisfied but still price is some High
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Placeholder –
Simply superb, Nice and looks great. All provisions are good, except the CPU Mob 24 PIN wire slot could have been given wide as the motherboard mostly closed the slot where we need to reroute via the front fans otherwise all cable management is good.
ashish..manjhi –
The media could not be loaded.
It is a defective item and when asked to exchange it, they are neither paying nor returning the payment. –
I was looking for an argb white dual chamber case and came across this one and it didn’t disappointed at all . I bought it from a local store for 4500/- which was a great deal while Amazon price was 5299/- .
Coming to the build quality, it’s sturdy for the price paid and loons premium , however I have noticed when I mounted the PSU and tightened the screws , the paint was peeling off around it. Fans are ARGB and addressable via motherboard if you have argb headers ( I’ve used a gigabyte motherboard and the RGB Fusion software didn’t work with this case , but worked well with third party softwares such as openRGB) . Pre-installed fans looks premium but the speeds are fixed and we cannot control it , also all 3 fans are mounted in outtake mode . So there is a concern in airflow . I’ve a Ryzen 5 5600 with the stock cooler and temps are idle on 39-40° and went upto 87 in 100% load for sometime . So better to use a third party cooler and mount 2 intake fans at the top or mount an 240mm AIO on the top side .
The packaging said it could mount 2 3.5″ HDD but theres only 1 slot avilable for HDD and 2 for SSD . You can mount 2 HDD if you put some form on the side of the left side chasis cover . Also mount the HDD first before mounting the PSU .
Coming to cable management, it’s very difficult on this case as there’s little space to hide all the wires . If you are using a non modular PSU then it would be hard to route and tie up all those wires . Wires would be congested and in future if you want to add up some components then it would be a headache for you . But all the quality of the cables such as USB 3.0 and 2.0 and RGB’s are good quality . Enough cable tag or ties and screws are provided for motherboard and drive mountings . Also keep in mind that this case can accommodate only Micro ATX or ITX form factor motherboards . A mircro ATX board looks fuller in this case . If you have a full ATX board , better to go for Hermes or ANT E-Sports Crystal XL .
Conclusion :- if you are looking for an ARGB Dual chamber case on a budget , then this is definitely worth it .
Kunal Arora –
It has plenty of room for cable management and a psu shroud all in all a great choice for pc.
Placeholder –
Good product quality thikness is ok ok
Jagan –
It is a defective item and when asked to exchange it, they are neither paying nor returning the payment.
Jagan –
The media could not be loaded.
Sabari Roy –
Get one new now fully satisfied but still price is some High
Placeholder –
Simply superb, Nice and looks great. All provisions are good, except the CPU Mob 24 PIN wire slot could have been given wide as the motherboard mostly closed the slot where we need to reroute via the front fans otherwise all cable management is good.