ZEB- Hype is a high-end gaming chassis with a spacious interior equipped with tempered glass on the left-side panel and a front mesh to ventilate the chassis.
Combined with the chassis, there are four ARGB LED cooling fans with inner LED light, one on the rear measuring 120mm and three on the front measuring 120mm each. You can add two extra 120mm cooling fans to the top for sufficient ventilation.
The chassis supports AIO coolers that can be installed with 120mm on the rear, 240mm on the top, and 360mm on the front of the panel.
The top panel of the chassis includes one USB 3.0 connector, as well as mic and headphone connections for audio connectivity.
For expandability, 7 expansion slots are available on the back panel for add-on cards.
The chassis is equipped with ARGB inner glow LED fans that emit vibrant colors and a LED control button that controls all its LED light modes. You can set your desired color for the chassis by giving a connection to the motherboard. These ARGB fans can add up new colors to the chassis by syncing with the computer(MB sync).
To adorn the design of the chassis, it has uniquely designed horizontally slanting front LED strips along with the mesh on the panel for unconfined airflow.
The chassis can hold VGA cards up to 320mm in length and CPU coolers up to 155mm in height. The power supply can be mounted on the chassis’s bottom.
With its magnetic dust filters on top and a regular dust filter on the bottom panel, this chassis is made to provide a practical solution for dust accumulation caused by the fans.
Another feature of this high-end chassis is the storage capacity which can support 2 HDD (3.5). The chassis can also support 2 SSD (2.5) drives.
,
Specification: ZEBRONICS Hype Mid-Tower Premium Gaming Cabinet – ATX/M-ATX/M-ITX, 3 x 120 mm Front, 1×120 mm Rear Fan, ARGB Inner Glow, LED Control, Tempered…
Brand
ZEBRONICS
Manufacturer
Zebronics India Pvt Ltd
Series
ZEB
Colour
Black
Item Height
42.8 Centimeters
Item Width
25.4 Centimeters
Product Dimensions
49.3 x 25.4 x 42.8 cm, 4.4 Kilograms
Item model number
ZEB-HYPE
Number of USB 3.0 Ports
1
Country of Origin
China
Item Weight
4 kg 400 g
8 reviews for ZEBRONICS Hype Mid-Tower Premium Gaming Cabinet – ATX/M-ATX/M-ITX, 3 x 120 mm Front, 1×120 mm Rear Fan, ARGB Inner Glow, LED Control, Tempered…
4.0out of 5
★★★★★
★★★★★
4
★★★★★
2
★★★★★
1
★★★★★
0
★★★★★
1
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Placeholder –
Good product quality thikness is ok ok
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Placeholder –
Simply superb, Nice and looks great. All provisions are good, except the CPU Mob 24 PIN wire slot could have been given wide as the motherboard mostly closed the slot where we need to reroute via the front fans otherwise all cable management is good.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
It is a defective item and when asked to exchange it, they are neither paying nor returning the payment. –
I was looking for an argb white dual chamber case and came across this one and it didn’t disappointed at all . I bought it from a local store for 4500/- which was a great deal while Amazon price was 5299/- .
Coming to the build quality, it’s sturdy for the price paid and loons premium , however I have noticed when I mounted the PSU and tightened the screws , the paint was peeling off around it. Fans are ARGB and addressable via motherboard if you have argb headers ( I’ve used a gigabyte motherboard and the RGB Fusion software didn’t work with this case , but worked well with third party softwares such as openRGB) . Pre-installed fans looks premium but the speeds are fixed and we cannot control it , also all 3 fans are mounted in outtake mode . So there is a concern in airflow . I’ve a Ryzen 5 5600 with the stock cooler and temps are idle on 39-40° and went upto 87 in 100% load for sometime . So better to use a third party cooler and mount 2 intake fans at the top or mount an 240mm AIO on the top side . The packaging said it could mount 2 3.5″ HDD but theres only 1 slot avilable for HDD and 2 for SSD . You can mount 2 HDD if you put some form on the side of the left side chasis cover . Also mount the HDD first before mounting the PSU . Coming to cable management, it’s very difficult on this case as there’s little space to hide all the wires . If you are using a non modular PSU then it would be hard to route and tie up all those wires . Wires would be congested and in future if you want to add up some components then it would be a headache for you . But all the quality of the cables such as USB 3.0 and 2.0 and RGB’s are good quality . Enough cable tag or ties and screws are provided for motherboard and drive mountings . Also keep in mind that this case can accommodate only Micro ATX or ITX form factor motherboards . A mircro ATX board looks fuller in this case . If you have a full ATX board , better to go for Hermes or ANT E-Sports Crystal XL .
Conclusion :- if you are looking for an ARGB Dual chamber case on a budget , then this is definitely worth it .
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Jagan –
The media could not be loaded.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
ashish..manjhi –
The media could not be loaded.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Jagan –
It is a defective item and when asked to exchange it, they are neither paying nor returning the payment.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Kunal Arora –
It has plenty of room for cable management and a psu shroud all in all a great choice for pc.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Sabari Roy –
Get one new now fully satisfied but still price is some High
Placeholder –
Good product quality thikness is ok ok
Placeholder –
Simply superb, Nice and looks great. All provisions are good, except the CPU Mob 24 PIN wire slot could have been given wide as the motherboard mostly closed the slot where we need to reroute via the front fans otherwise all cable management is good.
It is a defective item and when asked to exchange it, they are neither paying nor returning the payment. –
I was looking for an argb white dual chamber case and came across this one and it didn’t disappointed at all . I bought it from a local store for 4500/- which was a great deal while Amazon price was 5299/- .
Coming to the build quality, it’s sturdy for the price paid and loons premium , however I have noticed when I mounted the PSU and tightened the screws , the paint was peeling off around it. Fans are ARGB and addressable via motherboard if you have argb headers ( I’ve used a gigabyte motherboard and the RGB Fusion software didn’t work with this case , but worked well with third party softwares such as openRGB) . Pre-installed fans looks premium but the speeds are fixed and we cannot control it , also all 3 fans are mounted in outtake mode . So there is a concern in airflow . I’ve a Ryzen 5 5600 with the stock cooler and temps are idle on 39-40° and went upto 87 in 100% load for sometime . So better to use a third party cooler and mount 2 intake fans at the top or mount an 240mm AIO on the top side .
The packaging said it could mount 2 3.5″ HDD but theres only 1 slot avilable for HDD and 2 for SSD . You can mount 2 HDD if you put some form on the side of the left side chasis cover . Also mount the HDD first before mounting the PSU .
Coming to cable management, it’s very difficult on this case as there’s little space to hide all the wires . If you are using a non modular PSU then it would be hard to route and tie up all those wires . Wires would be congested and in future if you want to add up some components then it would be a headache for you . But all the quality of the cables such as USB 3.0 and 2.0 and RGB’s are good quality . Enough cable tag or ties and screws are provided for motherboard and drive mountings . Also keep in mind that this case can accommodate only Micro ATX or ITX form factor motherboards . A mircro ATX board looks fuller in this case . If you have a full ATX board , better to go for Hermes or ANT E-Sports Crystal XL .
Conclusion :- if you are looking for an ARGB Dual chamber case on a budget , then this is definitely worth it .
Jagan –
The media could not be loaded.
ashish..manjhi –
The media could not be loaded.
Jagan –
It is a defective item and when asked to exchange it, they are neither paying nor returning the payment.
Kunal Arora –
It has plenty of room for cable management and a psu shroud all in all a great choice for pc.
Sabari Roy –
Get one new now fully satisfied but still price is some High