Front Access & Controls USB3.0 x 2, MIC / AUDIO(HD), Power, Reset
Fan Support : 2 x 140mm / 3 x 120mm Front , 2 x 120mm / 2 x 140mm Top, 1 x 120mm Rear / Preinstalled Fan : 1 x 120mm regular fan in rear
Dimensions 405 x 208 x 400mm(DWH)
,
Specification: Antec VSK10 Window Highly Functional Micro-ATX Gaming Cabinet with Transparent Side Panel, 1 x 120mm Regular Fan in Rear Preinstalled
Brand
Antec
Manufacturer
Antec
Colour
Black
Item Height
19 Inches
Item Width
10 Inches
Product Dimensions
43.18 x 25.4 x 48.26 cm, 4.74 Kilograms
Item model number
VSK10 Window
Number of USB 2.0 Ports
2
Number of USB 3.0 Ports
2
Are Batteries Included
No
Included Components
Cabinet with 1 Pre-installed Fan
Country of Origin
China
Item Weight
4 kg 740 g
13 reviews for Antec VSK10 Window Highly Functional Micro-ATX Gaming Cabinet with Transparent Side Panel, 1 x 120mm Regular Fan in Rear Preinstalled
4.0out of 5
★★★★★
★★★★★
4
★★★★★
7
★★★★★
0
★★★★★
2
★★★★★
0
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Sammy –
This cabinet is good if you want a compact design. but if you’re building your pc by yourself then do consider its small size, because cable management is a bit difficult in this cabinet. The bad part is my USB ports weren’t working that’s sad.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Techbattle –
The case is very pretty and has good front panel function, but when it comes to building and cable management there is nothing, great overall case for an experienced builder but I would not recommend to anyone new bc this will be a hassle to build in
It’s fine. But it’s really bad for new PC builders. The fan they gave us a three pin making installation confusing. The opposite side of the glass side is hard to remove and a new builder may break it. You see, it is held together by very strange bent pieces of metal. Any pressure from either side while delivery locks those bent pieces of metal inward and then you cannot take off the back panel. The same metal pieces must be unbent front the tempered glass side. Then it is fine. It is quite attractive though.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Amazon Customer –
Compact enuff and Minimal look Magnetic dust fliter on top only Fixed Dust filters at bottom and on front plastic panel 2 USB 3.0/3.1/3.2 GEN-1 2 HDD brackets (hidden) backside and beside PSU 2 ssd mounts (seperate) front beside motherboard Plastic side panel but decent quality Supports 240mm radiator
just finished my build in this case. overall its a nice case and easy to build in but im dissapointed because i thought the window was tempered glass but its actually Plexiglas, with the plexi window on there’s a really blue tint. and it took the company a week and a half to ship out the item but once it was in the hands of USPS i revived in a couple days.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Amazon Customer –
This case can easily accommodate mini-ITX/micro-ATX motherboards. But first, INSTALL THE FRONT HEADER CABLES BEFORE MOUNTING THE MOTHERBOARD OH GOD IT’S SOO DIFFICULT AFTER YOU MOUNT THE ITX MOTHERBOARD.
I was planning for a proper SFF build, but due to budget I had to get a micro-ATX case. This case is a good VFM option and has a decent number of features –
– Bottom mounted PSU – Top vents with magnetic filters – Decent cable management – 2 USB 3 front headers – Acrylic side panels – 2 x 2.5″ SSD + 2 3.5″ HDD or 2 2.5″ HDD or 1 3.5″ HDD + 1 2.5″ SSD, so can have total of 4 drives. – Ample space to stuff PSU cables, esp if you have a non-modular PSU
In a way, I’m happy for the Acrylic side panels since they won’t break, however they will get scratched easily, hence I let the protective film on. It will come off eventually due to air circulation and dust, but whatever.
The pre-installed fan is in the rear which I mounted to the top.
No fancy RGB on this case, and with the acrylic panel it might not look too great.
My Ryzen 7 2700 and RX 570 are happy in the case.
ALTHOUGH I would not recommend this for water cooling, the front panel has few measly side vents, the coolers will be choked.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
HH_111 –
Excellent for Micro ATX motherboard
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Amazon Customer –
It’s the best case i evers seen nor used, its so small and cute looking also this one is not for new builder’s case if you know where to put and what to put, then go and buy this case otherwise please look for others case because it’s not meant for everyone
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Amazon Customer –
hard to work inside with MATX board if u have ITX or mini ATX motherboard it will be easy to work with 4 disks can be installed extra space provided to hide extra cables front airflow is low (make sure to install extra fans)
Sammy –
This cabinet is good if you want a compact design. but if you’re building your pc by yourself then do consider its small size, because cable management is a bit difficult in this cabinet. The bad part is my USB ports weren’t working that’s sad.
Techbattle –
The case is very pretty and has good front panel function, but when it comes to building and cable management there is nothing, great overall case for an experienced builder but I would not recommend to anyone new bc this will be a hassle to build in
GOWTHAMAPUTHAN –
Ryzen2700
GTX1070
B450M Steel legend
の環境で使っています。
＊見た目
表面の金属や、アクリル板も普通に押してもベコベコしない程度の強度もあり、アクリルも薄い水色で透明なアクリルより高級感があり満足しています。
＊静音性
ファンは静音性が高いものを選んだというのもあり、エアコンの風量の弱とかの音量です。とはいえ、高負荷時の運用をまだしていないので、その時はうるさいと感じるかもしれません。
前面に取り付けるファンの注意点として、ホコリ侵入防止の網などをつけていないと、上部ののUSBケーブルのコードがファンと擦れて異音が発生するのに注意してください。
＊裏配線
裏配線のスペースは私が下手なだけかもしれませんが、ギリギリでした。一部のケーブルをHDDの空きスロットに押し込みました。HDDを2枚刺すとやや厳しいかもしれないです。
＊その他
不満点として、説明書が入っておらず初心者には分かりづらいところです。ねじ止めで外せる箇所はいいですが、前面のファンを取り付ける際に、パネルを外すには力づくで引っ張る必要があり、説明書がない状態で行うのは怖かったです。
HH_111 –
It’s fine. But it’s really bad for new PC builders. The fan they gave us a three pin making installation confusing. The opposite side of the glass side is hard to remove and a new builder may break it. You see, it is held together by very strange bent pieces of metal. Any pressure from either side while delivery locks those bent pieces of metal inward and then you cannot take off the back panel. The same metal pieces must be unbent front the tempered glass side. Then it is fine. It is quite attractive though.
Amazon Customer –
Compact enuff and Minimal look
Magnetic dust fliter on top only
Fixed Dust filters at bottom and on front plastic panel
2 USB 3.0/3.1/3.2 GEN-1
2 HDD brackets (hidden) backside and beside PSU
2 ssd mounts (seperate) front beside motherboard
Plastic side panel but decent quality
Supports 240mm radiator
thisisganesh –
very very noice
Siddharth Jaiman –
欲しいケースが売り切れで
いつ入荷するのも不明だったので、
このケースにしました。
全体的に悪くないと思います。
上面にはファン用フィルターが付属して
下面の電源ユニットの位置にもフィルターが付いてます。
少し気になる点は、下面のフィルターが
安物すぎて取り付けが難しい事と、
全面のケースが外しにくい箇所ですかね？
その他は私としては満足なので、
おすすめしていきたいです。
ぎねっくす –
マザーボードを組むときにファンがジャマでしょうがなかった
Siddharth Jaiman –
just finished my build in this case. overall its a nice case and easy to build in but im dissapointed because i thought the window was tempered glass but its actually Plexiglas, with the plexi window on there’s a really blue tint. and it took the company a week and a half to ship out the item but once it was in the hands of USPS i revived in a couple days.
Amazon Customer –
This case can easily accommodate mini-ITX/micro-ATX motherboards. But first, INSTALL THE FRONT HEADER CABLES BEFORE MOUNTING THE MOTHERBOARD OH GOD IT’S SOO DIFFICULT AFTER YOU MOUNT THE ITX MOTHERBOARD.
I was planning for a proper SFF build, but due to budget I had to get a micro-ATX case. This case is a good VFM option and has a decent number of features –
– Bottom mounted PSU
– Top vents with magnetic filters
– Decent cable management
– 2 USB 3 front headers
– Acrylic side panels
– 2 x 2.5″ SSD + 2 3.5″ HDD or 2 2.5″ HDD or 1 3.5″ HDD + 1 2.5″ SSD, so can have total of 4 drives.
– Ample space to stuff PSU cables, esp if you have a non-modular PSU
In a way, I’m happy for the Acrylic side panels since they won’t break, however they will get scratched easily, hence I let the protective film on. It will come off eventually due to air circulation and dust, but whatever.
The pre-installed fan is in the rear which I mounted to the top.
No fancy RGB on this case, and with the acrylic panel it might not look too great.
My Ryzen 7 2700 and RX 570 are happy in the case.
ALTHOUGH I would not recommend this for water cooling, the front panel has few measly side vents, the coolers will be choked.
HH_111 –
Excellent for Micro ATX motherboard
Amazon Customer –
It’s the best case i evers seen nor used, its so small and cute looking also this one is not for new builder’s case if you know where to put and what to put, then go and buy this case otherwise please look for others case because it’s not meant for everyone
Amazon Customer –
hard to work inside with MATX board
if u have ITX or mini ATX motherboard it will be easy to work with
4 disks can be installed
extra space provided to hide extra cables
front airflow is low (make sure to install extra fans)