Antec P120 Crystal Mid Tower Gaming Cabinet Support E-ATX, ATX, M-ATX, ITX Motherboard with Tempered Glass Side Panel
Original price was: ₹15,050.00.₹9,111.00Current price is: ₹9,111.00.
- The leading industry slide button to open Hinged tempered glass side panel
- Vertical GPU mount support (3 PCI-E slots for better VGA cooling)
- Best Compatibility, 2 x 360mm radiator simultaneously (Side and bottom)
- Tempered glass front and side panel to show off your best gears
- Aluminium VGA holder included
- Country of Origin: China
,
Specification: Antec P120 Crystal Mid Tower Gaming Cabinet Support E-ATX, ATX, M-ATX, ITX Motherboard with Tempered Glass Side Panel
|
13 reviews for Antec P120 Crystal Mid Tower Gaming Cabinet Support E-ATX, ATX, M-ATX, ITX Motherboard with Tempered Glass Side Panel
Add a review
Original price was: ₹15,050.00.₹9,111.00Current price is: ₹9,111.00.
divakarownz –
吸気排気ケースファン、CPUファンをきちんと選べばRYZEN7 5800でダークソウルプレイ中でも温度40度台で安定しています
重量が重めなのが注意点か
Sudatt kunde –
何よりも中が見える。それ以外にはないでしょう。
グラボを縦置きにしたい人にはお勧めしたいケースです。
底面吸気の設計なので、グラボもよく冷えます。
横置きを縦置きにするキットも世の中にはありますが、、そのキットとライザーケーブルでこのケース買えてしまえるので、移植が面倒で無ければお勧めしたいケースです。
Kishor –
The media could not be loaded.
fantastic thanks Amazon
value for money
Pradeep Kumar Namdeo –
内部をライティングしたくこのケースを買いました。
ARGBファンが沢山付けられるし内部が広々としていて組み立てもやりやすかったです。
VGAブラケットも標準装備で大きいグラフィックカードを付けても歪む心配は無いのでGOOD!
ただ商品が割と高めなのとFANがついていないので追加費用が発生します。
私の場合は140mmARGBケースFANを底部に3個、側面に2個、背面に1個とCPUクーラーに同じものを2個つけたので合計8個の追加投資(サイズ ラウンド型14cmFAN1850円×8個=14800円)でケース本体より高くついた・・・
(ただ光るだけのファンならセットで安いのはあるけど、それじゃぁつまらないからね^^;)
それでもきれいにライティングができたのでとても満足です
あと裏配線スペースが意外と狭かった・・・。
Clifford S. –
A beautiful case by design and very easy to work with. Plenty of room available for all parts and components size. The USB ports and audio ports even comes with a rubber plug to prevent dust from getting in the ports which I feel like a well thought out feature and a nice add on in this price.
Y101 –
Perfect for liquid cooling and RGB gaming set up! Size is very huge and at this price you can’t get better than this Thank you antec!!
Sudatt kunde –
This is perhaps the easiest case I have ever worked with. Super easy to install the PSU and Motherboard, and comes with a GPU support bracket for heavier graphics cards.
For the price it would have been nice to have some case fans too.
jithendar –
Build this PC for gaming and Video Editing, although it’s using an older-gen Mobo & GPU …. it’s a beast when it comes to DAVINCI.
P120 crystal case from Antec is awesome, build quality is very good, It looks good
but if you have more then 4 Drives dont buy this , it would have been better if Antec sells more Drive cages separately, as I have a total of 4xSSD & 2X3.5″ HDDs & not many people use 360mm All in one cooler.
Next big problem is you Can’t mount a 280mm AIO in the side & long GPU together, i have a corsair h115i performance 280mm AIO which I cant mount on the side, although Antec says “Max GPU Length ≤ 450 mm”, my Strix 1070 actually hits the radiator if mounted sideways
Mounted the Aio rad in the bottom so that both GPU & CPU stays cool…
Cpu Overclocked to 4.3Ghz with 1.37v, Gpu overclocked to 2180 Mhz.
Y101 –
nothing to say.go for it value for money
Pradeep Kumar Namdeo –
底面吸気、側面・背面排気の珍しいケースです。
昨今のトレンドに反して、電源ユニットが上部取付となるのも珍しいかもしれません。
底面に引き出し式のダストフィルターが付いているのでお手入れカンタン、かつ吸気ファンからの風をダイレクトにグラボに当てられるので設置場所によっては冷却効率が良くなるかもしれません。
電源ファンが上部にある、という事でデザイン性に疑問を持たれる方もいらっしゃるかもしれませんが、個人的にはむしろカッコいいと思います。(電源ユニットの側面が露出するので、それなりに良い電源を用意するとより良いと思います)。
電源ユニットの前に3.5インチベイが2つ着いていますが、これは側面に280mm以上の簡易水冷ラジエーターを入れる場合、排他利用になりそうです。
自分は最初LianLiのO11で組むつもりでしたが、あちらはNH-D15が入らないので此方にしました。
底面に14mmファン3つ、側面に14mmファン2つ、背面に12mmファン1つ搭載して運用しています。
内部のスペースが広いのでパーツの自由度が高く側面パネルも開閉可、また強化ガラス製で美しい上に細部の作りも安っぽさが皆無なので、本当に良いケースだと思います。1万円超えのPCケースは確かにそこそこのお値段に感じるかもしれませんが、本品はお値段以上の出来だと断言します。
惜しむらくはやはりガラス製なので傷つけると気になってしまう点、また側面に配線スペースがあるとはいえ、やはりほぼ全面ガラスなので配線にとても気を遣う為初心者向けとは言えない点ですが…そこはもう仕方ないかなと思います。
余談ですがダンボールから開封する際、箱から出そうとして持ち上げた時に重さと運動不足でぎっくり腰になりました。これから買う方はご注意を。
jithendar –
Wt i didnt get any fans just the cabinet
Not worth it! Case is good but really bad toxic seller please dont buy from him
Clifford S. –
I am reviewing this product after few days of using it, let me start with the delivery process, there was a slight delay in delivery but I understand that it wasn’t intentional because the product had to be shipped from Delhi and the destination was in South india a city called Mysore, the delivery person was very helpful and even helped me unpck the box to check for any damages or breakage of the product glass during delivery, for the packaging side i give the rating as 3 stars only because the box was damaged during transport and should have taken extra care because it’s an item with an tempered glass inside and no instructions were on box to mention it, also as much as I admire the Amazon’s stance on not wasting additional packaging to reduce unwanted wastage of materials atleast they should take care of products which are delivered without it, why I would like to mention this is because Amazon is not only doing this in India they’re doing it globally as the rtx 2080 delivered in UK too was not packed with outer covering and such an expensive piece of hardware should not be delivered that way it’s fine for products with less valuable to be delivered in Amazon’s way, I received a small 4 pin CPU fan splitter with proper full amazon packaging which was really unecesesary to be honest, let me come to the product itself, the product is well built and sturdy compared to most cases on market for the price range of below 10k, only thing is it’s bit on heavy side due to tempered glass on frony and side it weighs at 13kgs and the since it’s glass try to handle it with care while installing stuff in it we can easily remove the side glass while installing motherboard or other components to avoid damages, the case doesn’t come with any built in fan unfortunately for any people who doesn’t want to spend extra on custom fans but it’s understandable because to reduce extra costs it was needed and for many enthusiastic person they wouldn’t even need basic fans and it’s unwanted and simply an waste, the case cable management it’s the best in class unfortunately as there is no rubber pockets to pass any cables from behind the case to hold any wires and if you don’t have an modular psu it’s very difficult to manage the cables behind the case also there is no many cable tag points in case to properly route the cables which is a shame, even with a basic setup the case looks good and also there is an provision like most new cases for vertical GPU mount and there is also an GPU support bracket for long cards to avoid any sagging, but there is no pcie Riser cable provided with the case so we need to search one online to get a good one unfortunately for a good price, PS don’t go for any cheaper riser cables below 3k those are very bad quality, currently I am running with an basic GPU since I am waiting for an new version of RTX cards which are to be released in 2020 and this case has very good support for very huge cards upto 35+ cms that is and support bracket holds them well unfortunately I can’t test it presently Because of lack of large GPUs. There isn’t much of sound proofing in the case compared to be quiet series cases but aesthetically it’s an beauty to watch especially if you are looking for water cooling or using LED mods this case it’s the best one out there, also there is no power or hdd usage LEDs installed in the case but there is an provision for light around USB ports using an additional sata power connector also there are USB 3 ports and power and reset buttons providedon top of the case which also function great , overall Antec has done a great job maybe a future revision will be made with further improvements, I’ll update the review once I get more components installed in the case.
Kishor –
This is premium and great looking