White, Mid- Tower, 410 x 210 x 450 mm, Tempered Glass Side Panel
7 Expansion Slots, 2 x 3.5” Drive Bay, 2 x 2.5” Drive Bay
I/O Panel : 2x USB 2.0, 1 x USB 3.0 Audio In / Mic In (TRRS Port), LED Button
Fan Support : 3 x 120/140 mm Front, 2 x 120/140 mm Top, 2 x 120 mm Bottom, 1 x 120 mm Rear
VGA Card Length : 360 mm ; CPU Cooler Height : 165 mm
,
Specification: Ant Esports SX7 Mid- Tower Computer Case/Gaming Cabinet – White | Support ATX, Micro-ATX, Mini-ITX | Pre-Installed 3 x 120mm Front Fans
Brand
Ant Esports
Manufacturer
Ant Esports
Series
SX
Colour
White
Item Height
45 Centimeters
Item Width
21 Centimeters
Product Dimensions
41 x 21 x 45 cm, 5.5 Kilograms
Number of USB 2.0 Ports
2
Number of USB 3.0 Ports
1
Country of Origin
China
Item Weight
5 kg 500 g
8 reviews for Ant Esports SX7 Mid- Tower Computer Case/Gaming Cabinet – White | Support ATX, Micro-ATX, Mini-ITX | Pre-Installed 3 x 120mm Front Fans
4.3out of 5
★★★★★
★★★★★
5
★★★★★
2
★★★★★
0
★★★★★
0
★★★★★
1
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Placeholder –
Good quality cabinet for this price and good value for you money!
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Adithya –
If you installing 4060 graphics card or higher with water cooler GPU it really hard to install. In case you want to build a proper gaming PC with option to upgrade with big components would recommend to go for bigger cabinet, I open the box out of return window thus could not return. Over all build quality is good and no complaints for that.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Adithya –
The best case for this price point
Pros: 1)Rgb colors are cool. 1)Tempered glass. 2) Looks premium and material used for the metal parts are good. 3) Big case with good airflow.
Cons: 1) Case comes with only one fan at the back 2) Was actually scared about the front panel removal to install fans in the front because the material used is mediocre. (Check instructions below on how to remove front panel because you can’t find it anywhere) 3) Little bit more space for cable management would have been nice.
For people who wants to install additional fans in the front follow the below steps: 1) Clearly check how the front panel is mounted by the plastic panel holders in the sides of the case when viewing from the back.Check for lenght of the wire from the rgb strip in the front. 2) Slowly apply slight pressure from the top and press the panel holders on both sides from the back and push the front panel edges with two hands on both sides. 3)The whole front panel should come out immediately if even pressure is applied on both sides when the top holders are detached ,if not slowly apply pressure to detach all the panel holders. 4) You can install upto max 2 * 120mm fans in the front. 5) After installation align the panel holders onto the respective slot and push from the bottom on both sides and apply even pressure on both sides along the lenght of the front panel.
Don’t rush any steps at it might damage the front panel and cause rgb strip problems and obviously lead to return issues etc.
Hope this helps !!!
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Piyush M. –
It is one of the best Pc case out there in the market at this price range, I got this case in just 3400rs which is value for money It provides 3 sata powered fans which we can control it with the button provided on the top of it. Moreover the quality it provides is the best and the air flow is also good. The only downside of these case is hard to manage cables.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Sanket Patil –
1. Build Quality –10/10 2. Looking –8/10 3. Air Circulation — 10/10 4. Space for Future — 10/10
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
NARAYAN MANNA –
This product is a decent one but build quality is little bit cheap and I got a damaged one front panel was detached from one side but was too lazy to return it and wait for another 5 days to assemble my pc the RGB lights are very good and the glass panel is also good but very fragile be careful while placing it overall a little above average product.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Piyush M. –
Received Damaged…
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Ashokkumar S –
The media could not be loaded.
Really very good cabinet at this price. RGB lights are very good. Transitions are also good. Best cabinet at this price range.
Placeholder –
Good quality cabinet for this price and good value for you money!
Adithya –
If you installing 4060 graphics card or higher with water cooler GPU it really hard to install. In case you want to build a proper gaming PC with option to upgrade with big components would recommend to go for bigger cabinet, I open the box out of return window thus could not return. Over all build quality is good and no complaints for that.
Adithya –
The best case for this price point
Pros:
1)Rgb colors are cool.
1)Tempered glass.
2) Looks premium and material used for the metal parts are good.
3) Big case with good airflow.
Cons:
1) Case comes with only one fan at the back
2) Was actually scared about the front panel removal to install fans in the front because the material used is mediocre. (Check instructions below on how to remove front panel because you can’t find it anywhere)
3) Little bit more space for cable management would have been nice.
For people who wants to install additional fans in the front follow the below steps:
1) Clearly check how the front panel is mounted by the plastic panel holders in the sides of the case when viewing from the back.Check for lenght of the wire from the rgb strip in the front.
2) Slowly apply slight pressure from the top and press the panel holders on both sides from the back and push the front panel edges with two hands on both sides.
3)The whole front panel should come out immediately if even pressure is applied on both sides when the top holders are detached ,if not slowly apply pressure to detach all the panel holders.
4) You can install upto max 2 * 120mm fans in the front.
5) After installation align the panel holders onto the respective slot and push from the bottom on both sides and apply even pressure on both sides along the lenght of the front panel.
Don’t rush any steps at it might damage the front panel and cause rgb strip problems and obviously lead to return issues etc.
Hope this helps !!!
Piyush M. –
It is one of the best Pc case out there in the market at this price range,
I got this case in just 3400rs which is value for money
It provides 3 sata powered fans which we can control it with the button provided on the top of it.
Moreover the quality it provides is the best and the air flow is also good.
The only downside of these case is hard to manage cables.
Sanket Patil –
1. Build Quality –10/10
2. Looking –8/10
3. Air Circulation — 10/10
4. Space for Future — 10/10
NARAYAN MANNA –
This product is a decent one but build quality is little bit cheap and I got a damaged one front panel was detached from one side but was too lazy to return it and wait for another 5 days to assemble my pc the RGB lights are very good and the glass panel is also good but very fragile be careful while placing it overall a little above average product.
Piyush M. –
Received Damaged…
Ashokkumar S –
The media could not be loaded.
Really very good cabinet at this price. RGB lights are very good. Transitions are also good. Best cabinet at this price range.