White, Mid Tower, 365 x 205 x 440mm, Transparent Side Pane
7 Expansion Slots, 2 x 3.5” Drive Bay, 2 x 2.5” Drive Bay
1 x USB 3.0, 2 x USB 2.0, 1 x Audio In, 1 x Mic, Restart Button
Pre-Installed 1 x 120 mm Rear Fan, Fan Support : 3 x 120mm Front, 2 x 120mm Top, 1 x 120 mm Rear, 2 x 120mm Bottom
2 x HDD, 2 x SSD, VGA Card : 335mm, CPU Cooler Height : 150mm
,
Specification: Ant Esports ICE-280TGW Mid Tower Computer Case I Gaming Cabinet -White Supports ATX, Micro-ATX, Motherboard with Transparent Side Panel 1 x 120 mm…
Brand
Ant Esports
Manufacturer
Ant Esports
Series
ICE 280TG Whie
Colour
White
Form Factor
ATX
Item Height
44 Centimeters
Item Width
20.5 Centimeters
Product Dimensions
36.5 x 20.5 x 44 cm, 5.2 Kilograms
Item model number
ICE 280TGW (White)
Number of USB 2.0 Ports
2
Number of USB 3.0 Ports
1
Included Components
Cabinet, User Manual
Country of Origin
China
Item Weight
5 kg 200 g
8 reviews for Ant Esports ICE-280TGW Mid Tower Computer Case I Gaming Cabinet -White Supports ATX, Micro-ATX, Motherboard with Transparent Side Panel 1 x 120 mm…
4.5out of 5
★★★★★
★★★★★
5
★★★★★
2
★★★★★
1
★★★★★
0
★★★★★
0
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Adithya –
The media could not be loaded.
Really very good cabinet at this price. RGB lights are very good. Transitions are also good. Best cabinet at this price range.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
MSP!… –
If you installing 4060 graphics card or higher with water cooler GPU it really hard to install. In case you want to build a proper gaming PC with option to upgrade with big components would recommend to go for bigger cabinet, I open the box out of return window thus could not return. Over all build quality is good and no complaints for that.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Sanket Patil –
It is one of the best Pc case out there in the market at this price range, I got this case in just 3400rs which is value for money It provides 3 sata powered fans which we can control it with the button provided on the top of it. Moreover the quality it provides is the best and the air flow is also good. The only downside of these case is hard to manage cables.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Jayendra Patel –
+’s: 1. Quite a handsome looker. 2. Three supplied fans at front are Auto RGB and LED can be either turned off or can choose from predifined patterns by using LED switch on the case.
-‘s: 1. Simply It can’t accomodate any AIO on top as the clearance on top from the MB is barly 25mm and its thin case so fans do sit on top of the MB. Only 2 x 120mm fans can be fitted. 2. The PSU shroud is too long which hinders with AIO hoses. Have somehow managed 360 AIO at front by palcing the hoses on the Radiator at the bottom to eliminate air getting into the pump. 3. Air flow of the supplied fans is quite good but fins do accumulate dust a lot. 4. Ant eSports claims 2 x 2.5 SSD/HDD can be mounted at the back of the MB Mmetal sheet which is misleading as the case has big holes but no mounting mechanism is provided. 4. Very thin metal sheets and flexes a lot during assembly but once all done its a good looker.
Finally worth buying if the price is around 3k and the plan is to have a Air cooler (can accomodate upto 170mm tall).
My System: R5 7600x Tuf B650M plus Wifi DeepCool L360 AIO DQ850-M-V2L Modular PSU Nitro+ RX 6950 XT GPU 500GB Crucial P3 1TB Crucial P3 500GB 2.5 SSD 1TB 3.5 HDD Add On Fans : Top 2, Rear 1 (DeepCool CF120 ARGB) Now Moved on to Asus P201 BLK (TG)
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Darshan hegde –
Best worth for money you pay However not a great cabinet for m-atx boards as you may probebly find it hard to add a liquid aio on top as space is conjusted… Best cabinet if you are looking for good airflow… You may need some additional connectors for connecting those argb fans. Overall its great cabinet with good airflow and asthetics
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Placeholder –
Meet my expectations, Decent build quality. Customizable. Easy for cable management. Mutiple connectivity options for RGB Led and Fan. Can change colour and mode of RGB lights using Reset switch (optional). 3 directional Airflow intake and rear exhaustion. More room for airflow. I’m using Ant Esports PSU, CPU Cooler, SSD, Keyboard and mouse too. All are working 👌
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Adithya –
The best case for this price point
Pros: 1)Rgb colors are cool. 1)Tempered glass. 2) Looks premium and material used for the metal parts are good. 3) Big case with good airflow.
Cons: 1) Case comes with only one fan at the back 2) Was actually scared about the front panel removal to install fans in the front because the material used is mediocre. (Check instructions below on how to remove front panel because you can’t find it anywhere) 3) Little bit more space for cable management would have been nice.
For people who wants to install additional fans in the front follow the below steps: 1) Clearly check how the front panel is mounted by the plastic panel holders in the sides of the case when viewing from the back.Check for lenght of the wire from the rgb strip in the front. 2) Slowly apply slight pressure from the top and press the panel holders on both sides from the back and push the front panel edges with two hands on both sides. 3)The whole front panel should come out immediately if even pressure is applied on both sides when the top holders are detached ,if not slowly apply pressure to detach all the panel holders. 4) You can install upto max 2 * 120mm fans in the front. 5) After installation align the panel holders onto the respective slot and push from the bottom on both sides and apply even pressure on both sides along the lenght of the front panel.
Don’t rush any steps at it might damage the front panel and cause rgb strip problems and obviously lead to return issues etc.
Hope this helps !!!
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
NARAYAN MANNA –
1. Build Quality –10/10 2. Looking –8/10 3. Air Circulation — 10/10 4. Space for Future — 10/10
Adithya –
The media could not be loaded.
Really very good cabinet at this price. RGB lights are very good. Transitions are also good. Best cabinet at this price range.
MSP!… –
If you installing 4060 graphics card or higher with water cooler GPU it really hard to install. In case you want to build a proper gaming PC with option to upgrade with big components would recommend to go for bigger cabinet, I open the box out of return window thus could not return. Over all build quality is good and no complaints for that.
Sanket Patil –
It is one of the best Pc case out there in the market at this price range,
I got this case in just 3400rs which is value for money
It provides 3 sata powered fans which we can control it with the button provided on the top of it.
Moreover the quality it provides is the best and the air flow is also good.
The only downside of these case is hard to manage cables.
Jayendra Patel –
+’s:
1. Quite a handsome looker.
2. Three supplied fans at front are Auto RGB and LED can be either turned off or can choose from predifined patterns by using LED switch on the case.
-‘s:
1. Simply It can’t accomodate any AIO on top as the clearance on top from the MB is barly 25mm and its thin case so fans do sit on top of the MB. Only 2 x 120mm fans can be fitted.
2. The PSU shroud is too long which hinders with AIO hoses. Have somehow managed 360 AIO at front by palcing the hoses on the Radiator at the bottom to eliminate air getting into the pump.
3. Air flow of the supplied fans is quite good but fins do accumulate dust a lot.
4. Ant eSports claims 2 x 2.5 SSD/HDD can be mounted at the back of the MB Mmetal sheet which is misleading as the case has big holes but no mounting mechanism is provided.
4. Very thin metal sheets and flexes a lot during assembly
but once all done its a good looker.
Finally worth buying if the price is around 3k and the plan is to have a Air cooler (can accomodate upto 170mm tall).
My System:
R5 7600x
Tuf B650M plus Wifi
DeepCool L360 AIO
DQ850-M-V2L Modular PSU
Nitro+ RX 6950 XT GPU
500GB Crucial P3
1TB Crucial P3
500GB 2.5 SSD
1TB 3.5 HDD
Add On Fans : Top 2, Rear 1 (DeepCool CF120 ARGB)
Now Moved on to Asus P201 BLK (TG)
Darshan hegde –
Best worth for money you pay
However not a great cabinet for m-atx boards as you may probebly find it hard to add a liquid aio on top as space is conjusted…
Best cabinet if you are looking for good airflow…
You may need some additional connectors for connecting those argb fans.
Overall its great cabinet with good airflow and asthetics
Placeholder –
Meet my expectations, Decent build quality. Customizable. Easy for cable management.
Mutiple connectivity options for RGB Led and Fan.
Can change colour and mode of RGB lights using Reset switch (optional).
3 directional Airflow intake and rear exhaustion. More room for airflow.
I’m using Ant Esports PSU, CPU Cooler, SSD, Keyboard and mouse too.
All are working 👌
Adithya –
The best case for this price point
Pros:
1)Rgb colors are cool.
1)Tempered glass.
2) Looks premium and material used for the metal parts are good.
3) Big case with good airflow.
Cons:
1) Case comes with only one fan at the back
2) Was actually scared about the front panel removal to install fans in the front because the material used is mediocre. (Check instructions below on how to remove front panel because you can’t find it anywhere)
3) Little bit more space for cable management would have been nice.
For people who wants to install additional fans in the front follow the below steps:
1) Clearly check how the front panel is mounted by the plastic panel holders in the sides of the case when viewing from the back.Check for lenght of the wire from the rgb strip in the front.
2) Slowly apply slight pressure from the top and press the panel holders on both sides from the back and push the front panel edges with two hands on both sides.
3)The whole front panel should come out immediately if even pressure is applied on both sides when the top holders are detached ,if not slowly apply pressure to detach all the panel holders.
4) You can install upto max 2 * 120mm fans in the front.
5) After installation align the panel holders onto the respective slot and push from the bottom on both sides and apply even pressure on both sides along the lenght of the front panel.
Don’t rush any steps at it might damage the front panel and cause rgb strip problems and obviously lead to return issues etc.
Hope this helps !!!
NARAYAN MANNA –
1. Build Quality –10/10
2. Looking –8/10
3. Air Circulation — 10/10
4. Space for Future — 10/10