Ant Esports ICE-100 Mid-Tower Computer Case/Gaming Cabinet – Black | Supports ATX, Micro-ATX, Mini-ITX | Pre-Installed 2 x 140mm Front Fans and 1 x…
Original price was: ₹3,499.00.₹3,109.00Current price is: ₹3,109.00.
- Black, Mid-Tower, 365 x 200 x 456 mm, Tempered Glass Side Panel
- 7 Expansion Slots, 2 x 3.5” Drive Bay, 3 x 2.5” Drive Bay
- I/O Panel – 2 x USB 2.0, 1 x USB 3.0, 1 x Audio In, 1 x Mic
- Pre-Installed 2 x 140mm Front Fans and 1 x 140 mm Rear Fan, Fan Support – Front : 3 x 120 mm/ 2 x 140 mm, Top : 2 x 120 mm, Rear : 1 x 120 mm
- VGA Card Length – 310mm , CPU Cooler Height- 159 mm
,
Specification: Ant Esports ICE-100 Mid-Tower Computer Case/Gaming Cabinet – Black | Supports ATX, Micro-ATX, Mini-ITX | Pre-Installed 2 x 140mm Front Fans and 1 x…
|
4 reviews for Ant Esports ICE-100 Mid-Tower Computer Case/Gaming Cabinet – Black | Supports ATX, Micro-ATX, Mini-ITX | Pre-Installed 2 x 140mm Front Fans and 1 x…
Add a review
Original price was: ₹3,499.00.₹3,109.00Current price is: ₹3,109.00.
Deep Digger –
Although the front fan made a slight knocking sound at first, after adjusting it’s position a little bit, the sound was gone.
There is plenty of space for cable management to make the pc look neat.
The tempered glass is also of good quality with a slight black tint that adds a class to the build.
Fans look great and make little to no noise.
Overall, it’s a great buy.
Eric Prem Raju –
Overall the cabinet is good with a decent style and affordable price tag. If you install RGB mother board and lighting it will be awesome.
Some points I want to share.
1. The metal quality is really good, and the side tempered glass also in good quality.
2. Packaging was good, though Amazon put additional packaging.
3. Front fans (3RGB) are static, they are not Auto RGB as described because they wont change the color.
4. Air flow is good especially if you are using this on summer season without air conditioning. Adding extra 4 fan will definitely increase the airflow. You can fit two fans on top and two on the bottom (It is just above the PSU casing.).
5. You can fit 3 normal hdd and 3 ssds. Check the pictures. I installed two ssd (they are actual 2.5′ hdd) and a single hdd.
6. Only one ssd clip is given that you can use for fitting ssd horizontally. See the attached photo. Mounting the rest of the ssd are based on small screws.
7. HDD bay is good and easy to use. You have to remove the tray and fit the hdd inside the tray and slide back.
8. Cable management is not up to the mark especially if you use ATX motherboard and many components. Still you can get a decent wiring.
9. Installing a full length ATX motherboard is tricky because the cabinet came pre installed screws for micro atx mount. You have to manually instal the extra mounting screws for atx mother board at first and then install the motherboard. I recommend you install the processor fan and heat sink before and place inside the cabinet because there is no actual room for moving the atx mobo inside this cabinet. Back panel IO shield was the toughest to install because there is no actual manual provided. It is going to be tricky for the first timer.
10. Tempered glass need to be removed care fully because once you remove all the mounting screws the glass may fall. So take care.
11. Front IO panel is not to the mark especially the wires are low quality.
12. The front is acrylic and not removable (I didn’t find an easy way to remove.).
At this price point (I bought at 3,650 rupees.) this is an excellent cabinet.
I took one star because of low quality front IO accessories.
NB: Front Audio is not working it may because of latest Realtek driver issue in windows 10.
Edit. Removing the hd audio cable from motherboard and replacing it tightly fixed the issue. Front audio is working fine
Deep Digger –
All fans working fine and colours are good , beautiful pc cabinet in 2200, 3.0 usb option, zebronics h81 motherboard supported,
Eric Prem Raju –
This is the best Cabinet in this price range for what it offers.
Type-C front panel can only be found on cases priced way higher than this one. This is the only case in this price range which has full ATX motherboard support with 3 HDD slots. I was looking into getting the Lianli Lancool II which has the same features but cost around 8.5k which is a lot of money for a case.
Fan support is excellent in this case and included 4 ARGB fans. The fans can be controlled by ARGB header on supported motherboards or through its own controller in the rear fan. There is no separate ARGB controller in this case. The lighting effects in the case are adequate as I don’t turn on the lights often.
Building in this cabinet is a breeze. The glass window is swivel and is fixed with magnets. The magnets are pretty strong. The HDD bracket is also detachable from the case and you can build the bracket outside the case. There is no HDD tray which help in hot swap, which is a bummer. As I have 4 HDDs, I added one of the HDD on the top, above the PSU shroud. The included GPU sag bracket is awesome. One suggestion for the sag bracket would be to add a rubber pad for the top holder as some old GPUs don’t have backplates and may short the PCB. There is option to vertical mount your GPU with additional riser cable but only two slot GPUs will work. There is also ample room on the front of the case to add water cooling too.
I am very satisfied with this case and I was waiting for the case to come in stock when I first saw it. Bought it for Rs. 4553 and it’s totally worth it’s price.
Awesome case by Ant eSports