Ant Esports Elite 1200 ATX Computer Case/Gaming Cabinet – Black | Support ATX, Micro-ATX, Mini-ITX | Pre-Installed 3 Front Fans & 1 Rear Fan
₹2,649.00
- Black, Mid-Tower, 375 x 200 x 452 mm, Tempered Glass Side Panel
- 7 Expansion Slots, 1 HDD + 1 SSD or 2 HDD x 3.5” / 2.5″
- I/O Panel : 1 x USB 3.0, 2 x USB, HD Audio, Mic, Power Button, Reset Button
- Fan Support : 3 x 120mm / 2 x 140mm Front, 2 x 120mm / 2 x 140mm Top, 2 x 120mm Bottom, 1 x 120mm Rear
- VGA Card Length : 335 mm ; CPU Cooler Height : 160 mm
,
Related Products
Ant Esports Elite 1200 ATX Computer Case/Gaming Cabinet – Black | Support ATX, Micro-ATX, Mini-ITX | Pre-Installed 3 Front Fans & 1 Rear Fan
₹2,649.00
Kriti Singh –
The CPU cabinet comes with a few noteworthy design flaws that potential buyers should consider:
1. Limited Space for CPU 6-Pin Connector:
For those using mATX motherboards, there is insufficient clearance at the top of the case to properly route the CPU 6-pin power connector. This creates significant inconvenience during installation, as you may struggle to connect the cable without bending it awkwardly.
2. Improper PSU Mounting Design:
The PSU mounting holes are designed in a way that forces you to install the power supply unit upside down, with the fan facing downward. Unfortunately, the case does not provide adequate ventilation at the bottom, leading to restricted airflow for the PSU fan. This could cause overheating issues, especially under heavy loads, and is a major design oversight.
3. Acrylic Side Panel:
The side panel is made of acrylic rather than tempered glass. While this is not a major issue, it is worth noting for those who prioritize durability or aesthetics. Acrylic panels are prone to scratches and may not offer the same premium look as tempered glass.
4. Build Quality:
The overall build quality is mediocre, which aligns with the price point. It is neither exceptional nor terrible but sits in a middle ground that might be acceptable for budget-conscious buyers. However, don’t expect a robust or premium feel.
Deepak Kumar –
Best Gaming Cabinet In 1699/-… We get 4 pre installed fans, 3 in front and 1 at back
Aaryan B –
glass panel is not dark enough, it gets bad at night, build quality is very good with magnetic mat on top
it can hold 2x 3.5″ drives and 2x 2.5″ or 4x 2.5″ drives, total 4 drives
its relatively easy to assemble a PC with this cabinet, installing the 2.5″ – 3.5″ drives is hard
Kamran Ahmad –
it is value for money. acrylic panel. it came with a dent on one side. it is beautiful. it doesn’t seem to be ATX. It will become congested if you apply water cooler. build quality is good. not a glass panel. weight is also good. space inside is little less.
Samuel –
Great product with budget price. RGB is a very nice touch. Cons: I would not recommend this case if you are planning on putting liquid cooler or tower cooler for the processor as this cabinet is small and you’d run into the trouble of not being able to fit it in.
Jwala –
This cabinet looks good, the quality is good and is within this price range, but during shipping I got a broken bolt, which caused a little problem, otherwise it is very good product, thanks to Amazon
Kriti Singh –
Very happy with it’s quality around thiss budget and but it’s first con was that it hai side fiber transparent sheet not glass..and u can not switch off the lights of the cabinet..but it’s a decent gaming cabinet.. buy it freely without any hesitation if u have ur budget around 2k
Erik7aeiou –
Great product and amazing packaging from Amazon. They packed it within their own box even though the company packaging was very good, thanks Amazon. The product was delivered on time and safely without any damages.
As for the cabinet itself, it looks pretty cool. The design and the lights make it looks much better than my previous office type cabinet. My family is very impressed and my brother says will buy one for him aswell. The cabinet has neat finish and very good spacing. Many arrangement choices are given to organize wires properly togive a clean clutter free look to the componets.
The LED lights are also good and vary in intensity based on fan speed, although the fans are voltage based without pwm signal so can’t have advanced levels of control like a pwm fan (depending on bios, mine has only 3 step fan control option at 50, 75 and 100). Max RPM seems to be around 1250rpm for all the fans so not that fast or noisy. The fans do have both pin and molex connectors provided so that’s good too. The fans are also arranged by default for a postive pressure so helps with less dust in the cabinet. Mesh filter is also provided at the top and front facing. The top side can be used for additional coolers as well.
I like the bottom placement of PSU and the divider to separate bottom section. We can put more SSDs at this base as well so space utizilatioj is very good. I was specifically looking for ATX cabinet for this purpose. The build quality is also great, read some reviews here saying not that good quality but really it’s good enough for even occasional movements. I moved between rooms for 3-4 days and didn’t face any concerns, it’s lightweight and easily carried over.
Alas the glass is a plexi glass and not sure how durable but with care should not be problem. When it’s running with the LED lights on, it’s clear to see inside and I always wonder at the machine. It’s a great buy and I wanted to buy new cabinet for so long but was holding off. Now I feel like I should have bought it earlier for the amazing feeling.
If you are planning to buy this one congrats, it’s a great choice.