Noctua NH-D14, Premium CPU Cooler with Dual NF-P14 PWM and NF-P12 PWM Fans (Brown)
₹21,625.00
@import url(//c1.neweggimages.com/WebResource/Themes/WWW/CSS/seller/a_plus_content.css)
@import url(//c1.neweggimages.com/WebResource/Themes/WWW/CSS/seller/a_plus_content_responsive.css)
Combining a massive six heatpipe dual radiator design with an exquisite NF-P14/NF-P12 PWM dual fan configuration, the NH-D14 is built for ultimate quiet cooling performance. Topped off with a tube of Noctua’s award-winning NT-H1 thermal compound as well as the new SecuFirm2 multi-socket mounting system, the NH-D14 is an elite choice for the highest demands in premium quality quiet cooling.
Â
| Providing more surface area, better heat-distribution and superior airflow efficiency than conventional tower style heatsinks, the NH-D14’s six heatpipe dual radiator design was developed to provide ultimate quiet cooling performance in dual fan mode. | Â |
| Hanging out at the bottom of the fin-stacks, the NF-P14 fan doesn’t only contribute to the NH-D14’s superb CPU cooling capabilities but also provides massive airflow over surrounding motherboard components and heatsinks, thus ensuring excellent component cooling performance. | Â |
| An asymmetrical design that gives more clearance towards the RAM slots ensures good compatibility despite of the cooler’s size. The NF-P12 fan can be moved upwards or left off in order to further improve compatibility. | Â |
| Noctua’s SecuFirm2 mounting systems have become synonymous with quality, safety and ease of use. Supporting Intel LGA20xx (LGA2066, LGA2011-0 & LGA2011-3 Square ILM), LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) & AMD AM2, AM2+, AM3, AM3+, AM4, FM1, FM2, FM2+, the SecuFirm2 mounting included with the NH-D14 ensures perfect contact pressure and maximum convenience on all current sockets. |
Â
- 1x NF-P14 PWM premium fan
- 1x NF-P12 PWM premium fan
- 2x Ultra-Low-Noise Adaptor (U.L.N.A.)
- Y-Split Cable
- 4x Vibration-Compensators (for using NF-P12 as case fan)
- 4x Fan screws (for using NF-P12 as case fan)
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kits
- Noctua Metal Case-Badge
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
Â
-
Height (without fan): 160 mm
-
Width (without fan): 140 mm
-
Depth (without fan): 130 mm
-
Height (with fan): 160 mm
-
Width (with fan): 140 mm
-
Depth (with fan): 158 mm
-
Weight (without fan): 900 g
-
Weight (with fan/s): 1070/1240 g
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Â
,
3 reviews for Noctua NH-D14, Premium CPU Cooler with Dual NF-P14 PWM and NF-P12 PWM Fans (Brown)
Add a review
Related Products
₹21,625.00
John G. –
Pros: This thing is awesome. Not many products I can say that about 100%. 1) I replaced the Corsair H50 Water Cooling system with this. (the H50 Pump was making noise, was annoying). — Wasn’t affecting performance though.. 2) This is outperforming (at current clock speeds anyway) the H50.. which I didn’t think would happen. 3) Just for an example: i5-750, OC’ed just slightly over 3Ghz (mild OC for now),.. it runs, AT Load, in the 30’s and 40’s, celsius. I wasn’t expecting such efficient cooling with Prime95 torture. Easily as efficient as the H50, if not more. 4) This thing is QUIET. You get top cooling performance ON AIR, and quiet? Whats the catch? (price maybe) — but it is true, it is whisper silent.. 5) Installation — Easy, trust me. Some of these monster HS’s are incredibly difficult, this thing is designed so well. Has all the parts you need and more, and GOOD instructions if you need them. Cons: *- If I had to list anything it would be the price, but , honestly, it is (at the moment) , very new to the market.. and is a top tier cooler, so the 80$ price tag is where it should be for now. It is worth the cash if you need the best air cooling that can be had, and you also want silence. Overall Review: It comes with everything so neatly packed, pack for Intel chipsets, Pack for AMD chipsets,.. and pack of ‘common parts’. Comes with its own Thermal compound that is a very good compound regardless of the heatsink/fan(s). Comes with a screw driver.. you don’t even need to break out a tool to do this. The only thing I recommend for anyone before purchasing is to take the measurements from the specifications .. and DO measure in your board and case to make sure you have room. Particular problem area is RAM. If you have RAM with tall heatsink/spreaders you might have to pass , or make some modifications. Just do the measurements and you can figure it out pretty quickly. I see no one else has reviewed this on newegg, so I have to rate it a MUST BUY if you are on the fence and know it will fit. Nothing is going to beat this other than a considerable *custom* water cooling setup (IE Big rad, big pump, lots of plumbing and so on).
Joshua M. –
Pros: Installation is super simple – this cooler was much easier to install than my Hyper 212 Evo was. Performance is excellent. Keeps my i7-2600k around 30C at idle and 65-70C under load at 4.8 GHz! AMAZING! It’s inaudible in my case. Completely 100% silent even without using any of the low-noise adapters for the fans. Cons: The only potential con is that if you have very tall RAM you may have trouble installing the cooler and/or fans or worst case may have to buy new (low-profile) RAM. Overall Review: I’ve been using this for about 6 months now and I can’t imagine ever using another CPU cooler. I was worried about installing a cooler this big being a pain, but it took literally about 2 minutes – it was a pleasant surprise!
Charles C. –
Pros: Awesome cooling Great company, customer service Cons: Size Lack of clearance to PCIe slot Overall Review: This CPU cooler by Noctua really gets the job done. I was building a new 5th generation Intel system and didn’t want to go with liquid cooling and this one had high marks. Noctua as a company is in Austria and everything about them screams quality. Even though my motherboard was only a couple of months old, they already had updated their website to show compatibility. I highly recommend going to the Noctua website and looking up your exact motherboard and RAM on their compatibility page. I did this and verified that my Gigabyte Champion motherboard and Corsair Vengeance LPX RAM were compatible, but then found that the cooler was just a little too close for comfort to the 1st PCIe slot. Noctua suggests insulating the fan clips as a solution but that is a little scary of a solution for me, so just be aware of it (I ended up just using the second slot). This is the sole reason for the subtraction of an egg on this review. Also ensure you have enough case height. I have a rather large Thermaltake Armor 8000 and still just barely cleared the case door. Also of note is the bracket required for the 2011-v3 socket is not included by default, though the company will airmail you one for free if you request it on their website with proof of purchase. All the size constraints aside, this cooler is amazing. The fans are extremely quiet and keep the CPU at near room temperature most of the time. When the fans spin up you barely even notice. The quality of the parts is top notch, and has sold me on Noctua in general (I just replaced all the fans in my system with Noctua versions. The two tone brown may be strange for some, but I find it a nice change of pace from blue/black/red everything with LEDs all over the place. Overall a great cooler and a solid four stars. It’d easily be six stars if not for the issue with the PCIe slot. Granted, the cooler was designed before the motherboard, and the website says there could be an issue, but it’s more of an issue than is led on.