be quiet! Dark Rock Pro TR4 for AMD, high-end CPU Cooler, 250W TDP, two Silent Wings 3 PWM fans 135/120, Ryzen Threadripper
₹6,288.00
DARK ROCK PRO TR4
No Compromise Silence and Performance
Dark Rock Pro TR4 offers an immense cooling performance of 250W TDP and virtually inaudible operation. Excellent for high-end systems and demanding workstations.
- Designed for AMD TR4 only
- Two virtually inaudible Silent Wings PWM fans
- Funnel-shaped frame of the front fan for high air pressure
- Achieves only 24.3dB(A) at maximum fan speed
- Seven high-performance copper heat pipes
- Airflow-optimized cooling fins; cutouts enhance the RAM compatibility
- Easily installable black installation kit can be mounted from above
- Brushed aluminum top cover with diamond cut finish
- 3-year manufacturer’s warranty
IMMENSE COOLING POWER
For AMD TR4 motherboards
No compromise in silence and performance for overclocked systems and demanding graphics applications! Dark Rock Pro TR4 is designed for AMD TR4 only and provides an impressive rating of 250W TDP.
VIRTUALLY INAUDIBLE OPERATION
Even at 100% PWM fan speed noise is an insignificant 24.3dB(A)
The two Silent Wings PWM fans feature advanced fluid-dynamic bearings, smooth six-pole motors and airflow-optimized fan blades. The front Silent Wings 3 fan provides extremely high air pressure, thanks to a funnel-shaped air inlet in the frame. Decoupled fan mounting with vibration-isolating elements on the heat sink.
HIGHLY ADVANCED DESIGN
The core features that result in high-end cooling
Dark Rock Pro TR4 is equipped with seven advanced technology 6mm copper heat pipes that maximize the heat conductance. Airflow-optimized, wave-contoured cooling fins with small dots on their surfaces increase the air circulation. The special black coating with ceramic particles makes a perfect transfer of heat possible.
DOUBLE-TOWER LAYOUT
Powerful cooling for your components
Dark Rock Pro TR4 contains two aluminum heat sinks. The cutouts provided enhance its RAM compatibility. Two fans are pre-installed. It is also possible to add another 120mm fan for even better cooling.
USER-FRIENDLY ELEGANCE
Stylish and easy to install
The mounting kit for the Dark Rock Pro TR4 cooler is completely black, perfectly matching the black design of the cooler itself. You can conveniently install the cooler on the motherboard from above. The brushed aluminum top cover with its diamond cut finish adds a touch of elegance to this high-end cooler.
,
Specification: be quiet! Dark Rock Pro TR4 for AMD, high-end CPU Cooler, 250W TDP, two Silent Wings 3 PWM fans 135/120, Ryzen Threadripper
|
3 reviews for be quiet! Dark Rock Pro TR4 for AMD, high-end CPU Cooler, 250W TDP, two Silent Wings 3 PWM fans 135/120, Ryzen Threadripper
Add a review
Related Products
₹6,288.00
Anonymous –
Pros: HUGE, due to the size of the heatsink and fan assembly it is able to handle intense amount of CPU heat output. It will keep a 2950x Ryzen Threadripper at 98 degrees Fahrenheit and boosting to almost 4 GHZ most of the time. Extremely quiet. Rather easy install considering the size. Not that heavy as well which was surprising so you don’t have to worry about motherboard flex. Cons: The enormity of the size will limit your ram choice, my GSKILL Trident Z is able to fit though anything higher will cause issues. So you will want to install all of your nvme m2, ram before trying to put this on your motherboard. Overall Review: Make sure that you take off plastic covering off the base before trying to install and then having to take it apart like me. You should also set the cross bar brace on the base, then set the entirety onto the motherboard so that there isn’t too much movement having to center the heatsink to the socket.
DANIEL S. –
Pros: – Excellent cooling performance – Easy installation – Runs silent – Cools my 2990WX Cons: – None Overall Review: I am using this to cool my Threadripper 2990WX processor. With the precision boost overdrive enabled, all 32 cores will run between 3.9GHz and 4.0GHz for most multi-threaded applications. With synthetic stress testers like Statuscore and Prime95, speeds will slowly throttle down to the 3.5GHz range, which is still very impressive for an air cooler on 32-cores! This cools better than the two Enermax Liqtech 360 coolers that I tried; both of those AIO coolers failed in under a year, and both were sent back for RMA. I literally have a brand-new, in box replacement from Enermax sitting unopened because I’d rather keep this air cooler on it. The heatsink barely gets warm and even under full load with synthetics, I never hear the fans. This is much quieter than the Liqtech. By a mile. The only thing you should be concerned about is the size. No joke– it’s is big as a toaster. 4 of the 8 DRAM modules cannot be installed or removed without first removing the heatsink. Your video card will still fit into the top slot but the backplate will have less than 2 millimeters of clearance. Just FYI. Highly recommended. Take it from me– I’ve had a 1950X, a 2950X and now a 2990WX, I’ve used a Corsair AIO cooler and the Liqtech 360. This isn’t going to clog up, outperforms over the long run, it’s quiet and it’s a hoot to look at. When I was ordering the product, I was unsure. Now that I’ve been using it for a month, buy it. Absolutely buy it. Cheers,
Anonymous –
Pros: – Gorgeous – Easy installation – High quality Silent Wings 3 fans means quiet cooler Cons: – Hangs over closest two RAM slots Overall Review: So far with my 1950X at 3.8Ghz with around a 1.2 volt VID, I haven’t seen the chip exceed 69 celsius at full load with (unnaturally high) Prime 95 super heat mode/32 threads full bore. This is the 4th air cooler I’ve tried with this chip, and this is the only one that can handle the overclocked load outside of high-end DiY water cooling that was well over twice the cost. I have tried the Noctua NH-U14S (with dual fan) which is a close second at somewhere between 72-73 celsius on this overclocked 1950x. I also tried the Cooler Master Wraith Ripper and DeepCool Fryzen. Both were lower performance with the Fryzen having great RAM compatibility, but with greater height and much louder fan, not as good. The Wraith Ripper was also fairly noisy and was much closer to the video card and worse RAM compatibility. Installation is fairly simple. Ensure your video card is out of the PC, and you are best served by having your case on its side. You put in two cross bars on each set of screws which go through a plastic standoff each, and a middle cross bar that spans the two. They include a nice long screw driver to help screw in the two nuts on each end because you unscrew two dots on the top of the cooler to expose a couple of holes to go through to screw it in. It’s not mandatory to do this, but helps in smaller cases.. Have a flash light handy if lighting in the area is not good, because the all black nuts on the all black cross member may be a bit hard to see. Once on, mating seems very solid and there is very little movement. Thermal paste is included, and there is a fan splitter for those motherboards like my MSI X399 Gaming Pro Carbon which only have one CPU fan header. place the clips on the middle fan and pivot them outwards and fit it through. Once done they are relatively easy to clip on, and then finish by putting the first intake fan (over the RAM) on. Once done expect a quiet cooling experience. And at 163mm tall it’s the shortest of the coolers outside of the only short option, the Noctua NH-U12S which doesn’t perform nearly as well. I’m extremely impressed with this cooler, and if you are not assured of the safety of water cooling with all-in-ones, this is basically your best bet.