COMPATIBLE INK: Red Star is 100% compatible ink and the properties such as specific gravity, viscosity, surface tension, & color tone are same as original.
FAST AND EASY TO REFILL – Just open the lid of the cartridge using a sharp devise like a screw driver/knife, take ink in the syringe, just fill it and paste the lid. Kindly watch demo video in YouTube channel “reliable redstar”.
SHARP, CRYSTAL CLEAR & SMUDGE FREE PRINTS : Red Star is perfect for hassle-free refilling & offer sharp, clear, smudge free & long lasting prints. Specially formulated with chemicals to offer an excellent colorful and photo quality printing performance.
CARTRIDGE NOZZLE HEAD CLEANING: If ink is not coming out properly after refilling then put the cartridge in the suction holder and suck one or two ml ink using the suction syringe.
IMPORTANT NOTE: Only cartridge in a good condition can give good prints after refilling. It is advised to refill the cartridge before it is fully empty and dry.
,
Specification: Red Star Ink Refill Kit Combo Pack with Instructions Suitable for Canon Pixma PG 47, 88, 745, 810 black & CL 57, 98, 746, 811 Colour Ink Cartridge…
Brand
Red Star
Manufacturer
Computer Bazar
Colour
Multi color
Item Height
13 Centimeters
Item Width
6 Centimeters
Product Dimensions
23 x 6 x 13 cm, 440 Grams
Item model number
canon 57 color
Are Batteries Included
No
Included Components
4 color ink in 60 ml bottles,, suction holders & syringe for nozzle cleaning, Ink filling syringe with needles
Country of Origin
India
Item Weight
440 g
8 reviews for Red Star Ink Refill Kit Combo Pack with Instructions Suitable for Canon Pixma PG 47, 88, 745, 810 black & CL 57, 98, 746, 811 Colour Ink Cartridge…
3.1out of 5
★★★★★
★★★★★
2
★★★★★
2
★★★★★
1
★★★★★
1
★★★★★
2
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Trupti –
Used the product today. Doing this yourself might get a bit messy, but completely satisfied with the print result post refill. Will definitely recommend to others. ** Important tips** 1) Pump all the syringes all the way multiple times before starting to use them. They are a little jammed in the beginning, so empty pumping them will smoothen the motion making it easier to do your refills. Otherwise you may end up splashing ink all over. 2) They suggest sticking the lid back on but it’s easier to use electrical tape to tightly bind around the smaller back part. It hold well and you just have to take the tape off for the next refill. This is better than regularly sticking and cracking open the lid which might eventually break it. A taped up cartridge also sits well in the cartridge chamber without issues. 3)Do not insert cartridge immediately post refill. Jeep it upright on a paper or tissue for at least 15 minutes. Even though the sponge absorbs all the ink, a little bit will leak out. So let the ink settle and the excess drain out; clean the print head gently and only then reinsert the cartridge. Hope this helps!!! Cheers!!!
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
T v. –
The ink is not usable for hp 805xl cartridge refilling as the ink spills out due to either poor quality or not suitable for HP All in one 2700 model
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Amazon Customer –
Video in the YouTube was helpful. Ink quality is not bad at all. The package had everything necessary for the refill other than fast glue. Price is reasonable. 48 hours delivery using prime. Tips for those who find it hard and for people who failed. 1. Never touch Printhead (bottom of catridge) or those electric unit. It’s very sensitive. If it’s damaged. Your printer won’t detect catridge. 2. Find a weak point in the catridge while opening. There should be some place where it’s a little open ( usually at the print head side) Insert a strong and thin knife. Using the top of the knife, open the weak point a bit and then the middle portion of the cartridge to weaken the gum. Then reinsert the knife back to the weak point and cut it like you are gonna cut an Apple ( not like you cut a paper ). When you are able insert more of your knife, wiggle the knife and pull upward so the cartridge top will come apart. It might feel like you are gonna bread the top lid. But it won’t! 3. Be very careful when you fill color catridge. The syringe is big and hard to push. You might end up mixing colours. Use your 2 hands to push the syringe slowly. You allign the catridge straight on a table top using a paper towel and then fill it. Drag less into syringe to avoid accidental over spills. 4. Get a fast glue before you start. The lid won’t close once you open it. More air and it will clog faster. 5. If it’s hard to install catridge in the suction holder. Don’t push it hard. it will damage the electric unit and print head. Let it rest for a day. Gravity will do the job. Even though it wasn’t necessary in my case, I tried and failed to Install catridge in that suction holder. That’s the only part I didn’t like. Could have designed a better holder.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Rohit sharma –
Cost is high suction tool doesn’t work
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Rishi –
There was no hand gloves and one syringe was broken . Btw print quality is same . But if a person can buy syringes from somewhere then these inks are available in market at a rate of ₹120 -100ml ,also the given syringe is so thick that I have to melt the cartridge carefully by protector (hot)
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Amazon Customer –
Stand provided with pack to hold cartridge is not fit and needles are too thik. Apart from that everything is working fine. For suction pump to work you need to hold cartridge against rubber without stand as it is not fit to suck some ink out, that too only if your cartridge is dried out. Quality of print is fine. Given the cost and products provided, it is worth buying. One more thing buy only if you like to get your hands dirty, you will have to be mindful while performing all the procedures. Not to do all that is written or show in video like they suggest to open cartridge, but you can just buy thin Needles and use it to fill ink from little hole from back of cartridge. Explore more videos how to refill cartridge on youtube.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Prashant kumar –
Print is average quality
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Amazon Customer –
Firstly I was hesitant to buy a local ink instead of the original ink. But considering the cost, I took the risk and brought the item. I would say that the item is of good quality, packaging was good, received the item before time and at last, the print quality is also good.
Trupti –
Used the product today. Doing this yourself might get a bit messy, but completely satisfied with the print result post refill. Will definitely recommend to others.
** Important tips**
1) Pump all the syringes all the way multiple times before starting to use them. They are a little jammed in the beginning, so empty pumping them will smoothen the motion making it easier to do your refills. Otherwise you may end up splashing ink all over.
2) They suggest sticking the lid back on but it’s easier to use electrical tape to tightly bind around the smaller back part. It hold well and you just have to take the tape off for the next refill. This is better than regularly sticking and cracking open the lid which might eventually break it. A taped up cartridge also sits well in the cartridge chamber without issues.
3)Do not insert cartridge immediately post refill. Jeep it upright on a paper or tissue for at least 15 minutes. Even though the sponge absorbs all the ink, a little bit will leak out. So let the ink settle and the excess drain out; clean the print head gently and only then reinsert the cartridge.
Hope this helps!!! Cheers!!!
T v. –
The ink is not usable for hp 805xl cartridge refilling as the ink spills out due to either poor quality or not suitable for HP All in one 2700 model
Amazon Customer –
Video in the YouTube was helpful. Ink quality is not bad at all. The package had everything necessary for the refill other than fast glue. Price is reasonable. 48 hours delivery using prime.
Tips for those who find it hard and for people who failed.
1. Never touch Printhead (bottom of catridge) or those electric unit. It’s very sensitive. If it’s damaged. Your printer won’t detect catridge.
2. Find a weak point in the catridge while opening. There should be some place where it’s a little open ( usually at the print head side) Insert a strong and thin knife. Using the top of the knife, open the weak point a bit and then the middle portion of the cartridge to weaken the gum. Then reinsert the knife back to the weak point and cut it like you are gonna cut an Apple ( not like you cut a paper ). When you are able insert more of your knife, wiggle the knife and pull upward so the cartridge top will come apart. It might feel like you are gonna bread the top lid. But it won’t!
3. Be very careful when you fill color catridge. The syringe is big and hard to push. You might end up mixing colours. Use your 2 hands to push the syringe slowly. You allign the catridge straight on a table top using a paper towel and then fill it. Drag less into syringe to avoid accidental over spills.
4. Get a fast glue before you start. The lid won’t close once you open it. More air and it will clog faster.
5. If it’s hard to install catridge in the suction holder. Don’t push it hard. it will damage the electric unit and print head. Let it rest for a day. Gravity will do the job. Even though it wasn’t necessary in my case, I tried and failed to Install catridge in that suction holder. That’s the only part I didn’t like. Could have designed a better holder.
Rohit sharma –
Cost is high suction tool doesn’t work
Rishi –
There was no hand gloves and one syringe was broken . Btw print quality is same . But if a person can buy syringes from somewhere then these inks are available in market at a rate of ₹120 -100ml ,also the given syringe is so thick that I have to melt the cartridge carefully by protector (hot)
Amazon Customer –
Stand provided with pack to hold cartridge is not fit and needles are too thik. Apart from that everything is working fine. For suction pump to work you need to hold cartridge against rubber without stand as it is not fit to suck some ink out, that too only if your cartridge is dried out. Quality of print is fine. Given the cost and products provided, it is worth buying.
One more thing buy only if you like to get your hands dirty, you will have to be mindful while performing all the procedures. Not to do all that is written or show in video like they suggest to open cartridge, but you can just buy thin Needles and use it to fill ink from little hole from back of cartridge. Explore more videos how to refill cartridge on youtube.
Prashant kumar –
Print is average quality
Amazon Customer –
Firstly I was hesitant to buy a local ink instead of the original ink. But considering the cost, I took the risk and brought the item. I would say that the item is of good quality, packaging was good, received the item before time and at last, the print quality is also good.