The performance of Ram is excellent, runs at 3000 Mhz, actually speed of ram depends on Motherboards & mainly Processors, Ram can adjust the speed according to Motherboards & Processors, Ram is overclockable & can be used upto 4000 Mhz, I have bought this for my Graphic Designing Desktop but running well in my gaming system too suitable for every kind of System. Heavy steel heat sinks with Red transparent top give this Ram funky & cool look, Adata is a famous & well known brand. Ram comes with lifetime (5 years) warranty. Main thing is Ram is available at very reasonable price on our favorite site Amazon.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Marcos Alfonso Lopez Padilla –
Excelente producto, bien embalado, llegó antes de los esperado.
Son módulos vistosos y de buenos materiales
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
ernesto medina –
las instale hace 2 meses, han funcionado sin ningun inconveniente.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Gulshan Khurana –
Excelente memoria adquirà por separado dos módulos de 8gb, funcionando excelente en dual chanel a su máxima capacidad de reloj en una moherboard Asrock, producto muy bueno para aquellos que no quieren RGB por todos lados sin dejar a un lado el estilo.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Jacob Simon Areickal –
Easy to install
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Govind –
This non-RGB CL-16 RAM is cheaper and it works great. I have been using it for more than a year and it is working flawlessly, I’ve never experienced any error or loose contact problem with it. Totally worth the buy, if your CPU and Motherboard supports 3200mhz and higher frequency ram then go for the 3200mhz variant.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Reviewer –
This RAM is the best there is in this price range. Gives you extreme performance for gaming and extremely easy to install. Brands like HyperX charge you well over 3400 RS for 8gb 3000MHZ while giving the same performance as XPG. I will suggest to buy 2 ram sticks for dual channel memory which not only boosts FPS but also increase performance as well.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Carlos Maldonado –
Cumple lo que indica.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Reviewer –
This part ADATA 8GB 3000MHz is EOL. Buy the 3200MHz of this same model instead. I bought 3000 one to upgrade my current Desktop PC which already has 2 of these installed.
Also don’t MIX the 3000MHz one and the 3200MHz one. you will get BSODs if your RAM is close to full.
ALL RAM STICKS in your system should be the exact same part no.
Also this 3000MHz variant is getting scarce. If you have these in your system and have free RAM slots then i suggest you upgrade soon.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
BINAYA KUMAR SWAIN –
excelente articulo al mejor precio, llego dentro de la fecha acordada, buen empaque, 100% recomendable
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
AnimatorNJ –
Hi I am a 3d artist and I had assembled a PC for aftereffects and 3d works. But had cosair vengence ram of 1stick 8gb AT 3000Mhz. I thought to buy this Ram and give some more ram space to system to 16gb. Now lets talk about how it performing. In my previous ram I tried to overclock the speed but it used to freeze my system at startup so clocking more than 3000mhz on that single channel ram it was hard. but when I installed this XPG ADATA GAMMIX D30 DDR4 8GB 3000mhz I tried to overclock the ram and results were amazing it worked on 3200mhz and I tried to boost it further 3500mhz it failed I Tried back to 3414Mhz it worked again. I am still confused how my cosair is also pairing up at 3414mhz with this ram. ie, both my rams are now running at 3414Mhz. Inst it amazing. I doono if this is good for both rams but as far 3 days passed I am seeing very good system perfomance on my 3d works and rendering. This is amazing Just Loved it. You can see my works on youtube : Niranjan Mondal ( 84 SUBS )
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
vikas –
Bought 2 sticks. One is manufactured by Samsung, the other by SK Hynix. Overclocked manually and currently running stable at 3466Mhz. Both sticks are performing very well and have not faced any issue so far. Unfortunately could not go past 3466Mhz without increasing the voltage so I let it be at that. Overall a very good value for money. Go for it guys instead of buying 3200Mhz RAM for considerably higher amount if you are comfortable with overclocking.
AnimatorNJ –
Performance is good
Dhruv Kumar –
The performance of Ram is excellent, runs at 3000 Mhz, actually speed of ram depends on Motherboards & mainly Processors, Ram can adjust the speed according to Motherboards & Processors, Ram is overclockable & can be used upto 4000 Mhz, I have bought this for my Graphic Designing Desktop but running well in my gaming system too suitable for every kind of System. Heavy steel heat sinks with Red transparent top give this Ram funky & cool look, Adata is a famous & well known brand. Ram comes with lifetime (5 years) warranty. Main thing is Ram is available at very reasonable price on our favorite site Amazon.
Marcos Alfonso Lopez Padilla –
Excelente producto, bien embalado, llegó antes de los esperado.
Son módulos vistosos y de buenos materiales
ernesto medina –
las instale hace 2 meses, han funcionado sin ningun inconveniente.
Gulshan Khurana –
Excelente memoria adquirà por separado dos módulos de 8gb, funcionando excelente en dual chanel a su máxima capacidad de reloj en una moherboard Asrock, producto muy bueno para aquellos que no quieren RGB por todos lados sin dejar a un lado el estilo.
Jacob Simon Areickal –
Easy to install
Govind –
This non-RGB CL-16 RAM is cheaper and it works great. I have been using it for more than a year and it is working flawlessly, I’ve never experienced any error or loose contact problem with it. Totally worth the buy, if your CPU and Motherboard supports 3200mhz and higher frequency ram then go for the 3200mhz variant.
Reviewer –
This RAM is the best there is in this price range. Gives you extreme performance for gaming and extremely easy to install. Brands like HyperX charge you well over 3400 RS for 8gb 3000MHZ while giving the same performance as XPG. I will suggest to buy 2 ram sticks for dual channel memory which not only boosts FPS but also increase performance as well.
Carlos Maldonado –
Cumple lo que indica.
Reviewer –
This part ADATA 8GB 3000MHz is EOL.
Buy the 3200MHz of this same model instead.
I bought 3000 one to upgrade my current Desktop PC which already has 2 of these installed.
Also don’t MIX the 3000MHz one and the 3200MHz one. you will get BSODs if your RAM is close to full.
ALL RAM STICKS in your system should be the exact same part no.
Also this 3000MHz variant is getting scarce. If you have these in your system and have free RAM slots then i suggest you upgrade soon.
BINAYA KUMAR SWAIN –
excelente articulo al mejor precio, llego dentro de la fecha acordada, buen empaque, 100% recomendable
AnimatorNJ –
Hi I am a 3d artist and I had assembled a PC for aftereffects and 3d works.
But had cosair vengence ram of 1stick 8gb AT 3000Mhz. I thought to buy this Ram and give some more ram space to system to 16gb.
Now lets talk about how it performing.
In my previous ram I tried to overclock the speed but it used to freeze my system at startup so clocking more than 3000mhz on that single channel ram it was hard.
but when I installed this XPG ADATA GAMMIX D30 DDR4 8GB 3000mhz
I tried to overclock the ram and results were amazing it worked on 3200mhz and I tried to boost it further 3500mhz it failed I Tried back to 3414Mhz it worked again.
I am still confused how my cosair is also pairing up at 3414mhz with this ram.
ie, both my rams are now running at 3414Mhz. Inst it amazing.
I doono if this is good for both rams but as far 3 days passed I am seeing very good system perfomance on my 3d works and rendering.
This is amazing Just Loved it.
You can see my works on youtube : Niranjan Mondal ( 84 SUBS )
vikas –
Bought 2 sticks. One is manufactured by Samsung, the other by SK Hynix. Overclocked manually and currently running stable at 3466Mhz. Both sticks are performing very well and have not faced any issue so far. Unfortunately could not go past 3466Mhz without increasing the voltage so I let it be at that. Overall a very good value for money. Go for it guys instead of buying 3200Mhz RAM for considerably higher amount if you are comfortable with overclocking.