ZEBRONICS Newly launched Argo Cube Form Factor Gaming Cabinet with Micro ATX, ITX, 2X 120mm Side + 120mm Rear Fan (ARGB Inner Glow), Tempered Glass…
₹7,080.00
Last updated on August 8, 2024 2:28 pm
- Elevate your ultimate gaming experience with the ZEB-Argo chassis which is designed exclusively to improve the visual appeal of your gaming setup with its cube form factor entirely bounded with a wrap-around tempered glass outlook
- For ample ventilation of the chassis, it is built-in with a 3x120mm inner glow ARGB LED cooling fans – one on the rear and 2x120mm fans on the side. 2x120mm cooling fans at the top and 2x120mm cooling fans at the bottom can be added externally
- Plenty of cooling for the chassis is supported by the AIO coolers – one 120mm on the rear, and another 240mm cooler on the top
- For audio and other device connectivity, the chassis comes with one USB 3.0 port, USB port, type-C port,a 3.5mm mic, and headphone port. You can now insert add-on cards at the back panel of the chassis in its 7 expansion slots.
- The fans inside the chassis can be controlled by the LED control switch on the front panel that controls all its LED light mode
- The chassis can support VGA cards up to 330mm in length and accommodate CPU coolers up to 160mm in height. The power supply can be installed on the bottom of the chassis
- Long hours of fierce gaming competition can now be held with the ZEB-Argo chassis, which has an optimal cooling design to give you the best airflow and frame rates
- The top of the chassis is fitted with magnetic dust filters to prevent dust accumulation
- Your cluttered cables plugged into the chassis can be organized efficiently with its cable management so there is room to fit in your heavy-duty components
,
Specification: ZEBRONICS Newly launched Argo Cube Form Factor Gaming Cabinet with Micro ATX, ITX, 2X 120mm Side + 120mm Rear Fan (ARGB Inner Glow), Tempered Glass…
|
8 reviews for ZEBRONICS Newly launched Argo Cube Form Factor Gaming Cabinet with Micro ATX, ITX, 2X 120mm Side + 120mm Rear Fan (ARGB Inner Glow), Tempered Glass…
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
Related Products
ZEBRONICS Newly launched Argo Cube Form Factor Gaming Cabinet with Micro ATX, ITX, 2X 120mm Side + 120mm Rear Fan (ARGB Inner Glow), Tempered Glass…
₹7,080.00
Kunal Arora –
It has plenty of room for cable management and a psu shroud all in all a great choice for pc.
Placeholder –
Simply superb, Nice and looks great. All provisions are good, except the CPU Mob 24 PIN wire slot could have been given wide as the motherboard mostly closed the slot where we need to reroute via the front fans otherwise all cable management is good.
Jagan –
It is a defective item and when asked to exchange it, they are neither paying nor returning the payment.
Jagan –
The media could not be loaded.
Placeholder –
Good product quality thikness is ok ok
Sabari Roy –
Get one new now fully satisfied but still price is some High
It is a defective item and when asked to exchange it, they are neither paying nor returning the payment. –
I was looking for an argb white dual chamber case and came across this one and it didn’t disappointed at all . I bought it from a local store for 4500/- which was a great deal while Amazon price was 5299/- .
Coming to the build quality, it’s sturdy for the price paid and loons premium , however I have noticed when I mounted the PSU and tightened the screws , the paint was peeling off around it. Fans are ARGB and addressable via motherboard if you have argb headers ( I’ve used a gigabyte motherboard and the RGB Fusion software didn’t work with this case , but worked well with third party softwares such as openRGB) . Pre-installed fans looks premium but the speeds are fixed and we cannot control it , also all 3 fans are mounted in outtake mode . So there is a concern in airflow . I’ve a Ryzen 5 5600 with the stock cooler and temps are idle on 39-40° and went upto 87 in 100% load for sometime . So better to use a third party cooler and mount 2 intake fans at the top or mount an 240mm AIO on the top side .
The packaging said it could mount 2 3.5″ HDD but theres only 1 slot avilable for HDD and 2 for SSD . You can mount 2 HDD if you put some form on the side of the left side chasis cover . Also mount the HDD first before mounting the PSU .
Coming to cable management, it’s very difficult on this case as there’s little space to hide all the wires . If you are using a non modular PSU then it would be hard to route and tie up all those wires . Wires would be congested and in future if you want to add up some components then it would be a headache for you . But all the quality of the cables such as USB 3.0 and 2.0 and RGB’s are good quality . Enough cable tag or ties and screws are provided for motherboard and drive mountings . Also keep in mind that this case can accommodate only Micro ATX or ITX form factor motherboards . A mircro ATX board looks fuller in this case . If you have a full ATX board , better to go for Hermes or ANT E-Sports Crystal XL .
Conclusion :- if you are looking for an ARGB Dual chamber case on a budget , then this is definitely worth it .
ashish..manjhi –
The media could not be loaded.